Symphonic RSMSD125 owner manual Functions, Playback

Functions

Operations described after this section are mainly based on the remote control use. Some operations can be carried out on main unit.

Playback

Before: Turn on the TV, amplifier and any other equipments which are con- nected to this unit. Make sure the TV and audio receiver (commercially avail- able) are set to the correct channel.

	DVD-V		CD
1			2
STANDBY–ON		OPEN/CLOSE
			Insert a disc with		1
			label facing up.
3	To start		4	To stop
	playback			playback
		PLAY		STOP
					3
					4

STANDBY–ONOPEN/CLOSE SEARCH

DISPLAY MODE

AUDIO
	1	2	3
SUBTITLE
	4	5	6
ANGLE
	7	8	9
REPEAT	CLEAR
		0	+10
A-B	PAUSE		SKIP
	SLOW
	PLAY
REV			FWD
	STOP
SETUP	TOP MENU		MENU

		P.SCAN
OPEN/CLOSE PLAY	STOP STANDBY-ON
	y	IR
		SENSOR

2		1	3	4	1
						Lights up
	P.SCAN (Progressive Scan) light					when power
	Lights up when the “PROGRESSIVE”					is on.
	is “ON”. Details are on page 15.

1Hint

•A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.

•Some DVDs may start playback from title 2 or 3 due to specific programs.

•During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.

TIP:

You can change the On-Screen language in “PLAYER MENU” setting. (Refer to page 14.)

DVD menu

Some discs contain menus which allow you to customize DVD playback. Press [K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]).

Calling Up a Menu Screen during Playback

•Hit [MENU] to call up the DVD menu.

•Hit [TOP MENU] to call up the title menu.

Hint

•Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for more details.

Resume

DVD-V CD

Hit [STOP C]. Resume mes- sage will appear on the TV

screen.		Resume ON
	Press 'PLAY' to play from here.
Hit [PLAY B], playback will
	To play the beginning,
resume from the point at which	press 'STOP' first and then 'PLAY'.
playback was stopped.

Hint

•To cancel resume, hit [STOP C] one more time during the stop mode.

•The resume information will be kept even when the power is turned off.

Paused and Step-by-Step Playback

DVD-V CD

Hit [PAUSE F] during playback.

To continue playback, hit [PLAY B].

DVD-V

The disc goes forward by one frame each time [PAUSE F] is hit during the pause mode.

To continue playback, hit [PLAY B].

Hint

•On DVDs, set “STILL MODE” to “FIELD” in the Display menu if pic- tures in the pause mode are blurred. (Refer to pages 14-15.)

Fast Forward/Reverse Search

DVD-V	CD
Press [FWD g] or [REV h] repeatedly dur-		E 1

ing playback to select the required forward or reverse speed.

To continue playback, hit [PLAY B].

Hint

•For DVDs, fast forward or reverse search speed is different depending on the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).

•For Audio CDs, approximate speed is 1(x2), 2(x8) and 3(x30).

Slow Forward/Slow Reverse

DVD-V
Press [FWD g] or [REV h] repeatedly dur-	1

ing the pause mode to select the required for- ward or reverse speed.

To continue playback, hit [PLAY B].

Hint

•Slow forward or reverse speed is different depending on the disc. Approximate speed is 1(1/16), 2(1/8) and 3(1/2).

•Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow playback mode are blurred. (Refer to pages 14-15.)

Zoom

DVD-V

Hit [ZOOM] repeatedly during playback to select the required zoom factor: x2, x4 or OFF.

x2 x4

Press [K / L / s / B] to slide the zoomed picture across the screen.

To exit zoom function, hit [ZOOM] repeatedly to select OFF.

Hint

•Zooming function does not work while the disc menu is showing up.

•x4 zoom is not available on some discs.

•The picture may be distorted when you press [PAUSE k] or [REV h] repeatedly in the zoom mode.

•It may take several seconds to slide the zoomed picture.

Functions

– 9 – EN