Symphonic SD300D owner manual Parental Control, Marker Setup Screen, DVD Setup, Virtual Surround

PLAYING A DISC

Parental Control

DVD-V

Parental Control limits the disc viewing that exceed your set- tings. (with a password or playback will stop.)

This feature allows you to prevent discs with alternative scenes from being played by your children.

PARENTAL LEVEL

Parental Level allows you to set the rating level of your DVD discs. Playback will stop if the disc’s ratings exceed the level you set.

CONTROL LEVELS

•ALL

All parental lock is cancelled.

•Level 8

DVD software of any grade (adult/general/children) can be played back.

•Levels 7 to 2

Only DVD software intended for general use and chil- dren can be played back.

•Level 1

Only DVD software intended for children can be played back, with those intended for adult and general use prohibited.

1Press SETUP in STOP mode.

2Press B to select CUSTOM, then press ENTER.

3 Press s or B to select

4	PARENTAL, then press ENTER.
	Enter your four-digit password	PARENTAL LEVEL ALL
		PARENTAL
5	then press ENTER.
	Press K or L to select
	PARENTAL LEVEL, then press ENTER.

6Press K or L to select the desired level.

7Press SETUP to exit.

NOTES:

•When doing this for the first time, enter any 4 digits. (except for 4737) That number will be used as the password from the second time onward.

•To change the password, press K or L to select CHANGE, then press ENTER. Enter the four-digit pass-word, then press ENTER.

•With some DVDs, it may be difficult to find if they are com- patible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

•Record the password in case you forget it.

IF YOU FORGET THE PASSWORD

1Press 4, 7, 3, 7 at step 3.

•Password will be cleared and parental level will be set to ALL.

2Proceed the above steps 3-5 again.

Marker Setup Screen

DVD-V CD

Use markers to memorise your favourite places on a disc.

1Press SEARCH MODE four times (CD: three times) during playback.

•The display screen and Markers will appear on the TV screen.

2Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that “- : - - : - -” appears in the display.

3When reaches the desired point, press ENTER.

•The Title or Track and elapsed playing time will appear in the TV screen.

4To return to the Marker later, press SEARCH MODE four times (CD: three times) during playback and s or B to choose the desired marker, then press ENTER.

NOTES:

•Opening the disc tray or turning off the power or select AC at step 2 and press ENTER will erase all Markers.

•To clear a marker, using s or B, position the cursor on to the marker number to be cleared and press CLEAR.

•You can mark up to 10 points.

5Press SEARCH MODE or RETURN to exit.

DVD SETUP

		Audio Setting					Black Level Setting
Choose the appropriate Audio settings for your equipment as it
									DVD-V
only affect during the playback of DVD discs of the DVD player.
					Adjust the Black Level Settings to make the black parts of
	1	Press SETUP in STOP mode.
					the picture as bright as you preferred.
	2	Press B to select CUSTOM, then press ENTER.
					1	Press MODE during playback.
		• CUSTOM mode will appear.
								ON
	3	Press s or B to select AUDIO, then ENTER to confirm.
						2	Press ENTER to switch ON/OFF.
	4	Press K or L to select the
							ON : Makes the dark parts brighter.
		below items, then press
							OFF : Shows the original picture as recorded.
		ENTER.	AUDIO
			DRC	OFF		3	Press MODE twice or RETURN to exit.
			DOWN SAMPLING ON
DRC (Dynamic Range Control) :			DOLBY DIGITAL	ON

•To compress the range of sound volume.

•The default setting is OFF.

DOLBY DIGITAL : QUICK

Set to ON when the player is connected to Dolby Digital Decoder.

(ON : Output by Dolby Digital)

(OFF : Convert the Dolby Digital to PCM)

•The default setting is ON.

DOWN SAMPLING :

•Set to ON when outputting in 48kHz.

•The default setting is ON.

When playing disc with copyright Protection

•If you select OFF, copyright protection will be activated and sound will be down sampled at 48kHz.

Virtual Surround

You can enjoy stereophonic visual space on your existing stereo system.

DVD-V CD MP3

1Press MODE twice (CD/MP3: once) during playback.

2Press ENTER to set the mode;

1(Natural effect), 2(Emphasized	OFF
effect), or OFF.

3Press MODE or RETURN to exit.

NOTE (for CD play only):

•Virtual Surround will not be effective if the sound mode is set to something other than STEREO.

•If noise is heard select lower level, or OFF.

5Press SETUP to exit.

– 13 – EN