Symphonic SD300D owner manual Troubleshooting Guide, Problem Solution

Page 15

TROUBLESHOOTING GUIDE

If the DVD player does not perform properly when operated as instructed in this Owner's Manual, check the player, consulting the following checklist.

Problem

Solution

No power

–Check if the AC power cord is properly connected.

No picture

–Check if the TV is switched on.

 

–Check the video connection

Distorted picture

–Sometimes a small amount of picture distortion may appear.

 

This is not a malfunction.

Completely distorted picture or

–Connect DVD player directly to the TV.

black/white picture with DVD

–Make sure the disc is compatible with the DVD player.

No sound or distorted sound

–Adjust the volume.

 

–Check that the speakers are connected correctly.

No audio at digital output

–Check the digital connections.

 

–Check if the audio format of the selected audio language matches

 

your receiver capabilities.

No DTS audio is output

–This player does not support DTS audio. This is not a malfunction.

No sound and picture

–Check that the VIDEO/AUDIO cable is connected to the correct

 

device (See Connecting to a TV)

Picture freezes momentarily

–Check the disc for fingerprints/scratches and

during playback

clean with a soft cloth wiping from center to edge.

Disc can’t be played

–Ensure the disc label is facing up.

 

–Check if the disc is defective by trying another disc.

No return to start-up screen when

–Reset the player by switching the player off, then on again.

disc is removed

 

The player does not respond to

–Aim the remote control directly at the sensor on the front of the player.

the remote control

–Reduce the distance to the player.

 

–Replace the batteries in the remote control.

 

–Re-insert the batteries with their polarities (+/– signs) as indicated.

Buttons do not work or player stops

–To completely reset the player, unplug the AC

responding

cord from the AC outlet for 5-10 seconds.

Player does not respond to some

–Operations may not be permitted by the disc.

operating commands during playback.

Refer to the instructions of the disc.

DVD player cannot read

–Use a commonly available cleaning CD/DVD to

CDs/DVDs

clean the lens before sending the DVD player for repair.

NOTES:

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.

Playback from a desired track and random playback are not available during program playback.

– 15 –

EN

Image 15
Contents SD300D Precautions About CopyrightRADIO-TV Interference Indice Table of ContentsAbout the Discs Supplied AccessoriesSymbols Used in this Manual IntroductionDVD FeaturesDisc Types ExampleRemote Control Functional OverviewFront Panel Rear View Hook UPS Loading the BatteriesHOW to Connect to a TV Without AUDIO/VIDEO Input Jacks Connecting to a Dolby Digital decoderPlaying a Disc Zoom Fast Forward / Reverse SearchSlow Forward / Slow Reverse Title / Chapter SearchOn-Screen Information Random PlaybackProgram MP3 PlaybackCamera Angle Stereo Sound ModeTrack Selection Audio LanguageParental Control Marker Setup ScreenDVD Setup Audio Setting Black Level SettingDisplay Setting Problem Solution Troubleshooting GuideMaintenance SpecificationsControles DE Operación Y Funciones Panel Delantero / Vista TraseraMando a Distancia Conexión a un Descodificador Dolby Digital Instalación de las PilasConexiones Conexión a un TelevisorReproducción de un DVD de Vídeo o un CD de Audio Reproducción DE UN DiscoFunai Corporation Limited Warranty