HOOK UPS
NOTES:
•Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner's Manuals for your TV, stereo system and any other components to be connected to the DVD player.
Connecting to an Amplifier Equipped with Digital Input Jacks such as MD deck or DAT deck
Use an audio coaxial digital cables (not included) for the audio connections. Connecting to an amplifier equipped with digital input jacks such as MD Deck or Dat Deck.
Amplifier equipped with digital
input jacks, MD deck, DAT deck, etc.
NOTES:
AUDIO OUT | L | Y | Cr | COMPONENT |
|
|
|
|
| VIDEO OUT |
|
DIGITAL AUDIO OUT |
|
|
|
|
|
PCM / BITSTREAM |
|
|
|
|
|
COAXIAL | R | VIDEO | Cb |
| |
|
| OUT |
|
|
|
To COAXIAL DIGITAL |
|
|
| To | To |
AUDIO OUT jack |
|
|
| OUT jack | INPUT jack |
|
|
|
|
| or |
To COAXIAL DIGITAL |
| To VIDEO OUT jack | To VIDEO INPUT jack | ||
AUDIO INPUT jack |
|
|
|
|
|
or wide screen TV
[Fig. 7]
•The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.
•Set Dolby Digital to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise dis- tortion, and may also damage the speakers.(See page 13 to set ON for Dolby Digital)
Connecting to a Dolby Digital decoder
If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround, the DVD player outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and
Use an audio coaxial digital cables (not included) for the audio connections.
Front
speaker Center speaker (left)
Dolby Digital
decoder
Surround
speaker (left)
Front
speaker (right)
AUDIO OUT | L | Y | Cr | COMPONENT |
VIDEO OUT
DIGITAL AUDIO OUT
PCM / BITSTREAM
COAXIAL R VIDEO Cb
OUT
To COAXIAL DIGITAL |
|
|
| |
AUDIO INPUT jack | To |
| To | |
|
|
| ||
| To COAXIAL | OUT jack | or | INPUT jack |
| DIGITAL AUDIO |
|
|
|
| OUT jack | To VIDEO OUT jack |
| To VIDEO INPUT jack |
|
|
| ||
Surround |
|
|
|
|
speaker | Subwoofer |
|
|
|
(right) |
|
|
| |
|
|
|
| |
or wide screen TV
[Fig. 8]
NOTES:
•If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio output in the setup mode.
•Unless connected to a Dolby Digital decoder, set Dolby Digital to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
Connecting to a TV or a Stereo TV that has Component VIDEO In Jacks
To Right (red) and | AUDIO OUT | L | Y | Cr | COMPONENT |
DIGITAL AUDIO OUT |
|
|
| VIDEO OUT | |
Left (white) | PCM / BITSTREAM |
|
|
|
|
|
|
|
|
| |
AUDIO OUT jacks | COAXIAL | R | VIDEO | Cb | |
Stereo system |
|
| OUT |
|
|
|
|
|
|
|
To Right (red) and Left (white)
ANALOG AUDIO INPUT jacks
To COMPONENT
VIDEO OUT jack
To COMPONENT
VIDEO INPUT jack
or wide screen TV
[Fig. 9]
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then con- nect the RF modulator to your TV’s antenna terminal as described above.
NOTE
•The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator.
– 8 – | EN |