Sears PLDED3273A-B user manual Connecting to a PC with VGA and 3.5 mm minijack …

Page 15

Connecting to a PC with VGA and 3.5 mm minijack …

Connecting to a PC with VGA and 3.5 mm minijack …

1.Make sure the power of HDTV and your PC is turned off.

2.Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the other end to the VGA port on the back of your HDTV.

3.Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end to the VGA Stereo Input port.

4.Turn on the power of the HDTV and your PC.

5.Use the remote control’s source button or the source button on the TV to switch to PC.

6.Change your PC resolution to 1360x768 at 60hz refresh rate.

7.Press MENU to use the OSD’s PICTURE option.

8.Under the PICTURE option select PC Settings.

9. Under PC Settings use AUTO ADJUST to adjust the screen. Please Note:

∙For the best results, please set your PC resolution to 1360x768 at 60 Hz. Please refer to the PC or graphic card’s manual for further instructions on how to set your resolution and refresh rate.

∙Please refer to your PC manual for video output requirements of the video card.

∙The VGA port of the TV features a power saving mode which will automatically turn off the TV, if there’s no signal provided for more than 5 minutes.

14

Image 15

Contents USER’S MANUAL 32” LED TVPLDED3273A-B  How Do I Clean The TV  Troubleshooting  Specifications Contents Installing Batteries to the Remote Control  Main Unit Description  Remote Control  OSD Basic AdjustmentINSTALLATION IntroductionNO USER- SERVICEABLE PARTS INSIDE To prevent fire or electrical shock hazard, do not expose to qualified service personnelPage External Television Antenna Grounding Important InformationPower Lines Television Antenna Connection ProtectionAttaching or Removing the Stand Installing Batteries to the Remote Control Identifying Front and Rear Panel Front ViewRear View Mounting Pattern If You Have Digital Cable without Cable Box or Antenna… Connection Suggestions∙ This source shares audio jacks with composite video Connecting DVD Player with Component YPbPr…This source shares audio jacks with YPbPr Connecting Wii with Composite…Connecting Cable or Satellite boxes with HDMI… Connecting to a PC with VGA and 3.5 mm minijack … Connecting a Digital Audio Receiver with Coax SPDIF… Main unit description Control Panel Button FunctionTV Terminal Connections Remote control Switch the program digitRED, GREEN, YELLOW, CYAN This button is not available PICTURE Installation GuideTIME SOUNDsub-menu. Only available in PC mode SETUPC．Press “/” button to select “Advanced Note The default password is “0000” LOCKPage Menu will appear Channel1. Press “” button to select “AIR/CLABLE ” and press the “/”button to select Cable or AIRPage How do I clean the TV? Cleaning the bezel and remote controlCleaning the Screen For adjust controls TroubleshootingSolutions Adjust your contrast, brightness and lamp settings from the OSD MenuThis TV follows NEC’s universal remote code ProblemsCheck your auto lock function’s settings inside the OSD up some channels but forgot about themALWAYS DISPLAYINGCANNOT Problems SolutionsTIPS Illustration SpecificationsStandard / Mild / Power Saving / User/Vivid Display panel3 General 2AudioDynamic/Standard/Soft/User 6 watt per channelFCC Compliance Statement