Troubleshooting
The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians.
Problems |
|
|
| Solutions |
|
|
|
| Connect power cord correctly. |
|
|
| |
|
| Turn on power. |
|
|
|
|
NO PICTURE | Connect video cable correctly. |
|
|
| ||
|
| Select the input signal source with proper cable connection with the source | ||||
|
| button. |
|
|
|
|
ABNORMAL | Match the colors on the cables to the ports off the back of the television. | |||||
COLORS |
| I.E. red cable to red colored port. |
|
| ||
PICTURE IS | Adjust your contrast, brightness and lamp settings from the OSD Menu. | |||||
TOO DARK | For adjust controls |
|
|
| ||
AUDIO ONLY | Make sure you have connected both your video and audio cables. | |||||
NO PICTURE |
|
|
| |||
The TV’s tuner signal must not be lower than 65 %. |
|
| ||||
PICTURE ONLY | Make sure the audio cable is connected. |
|
| |||
NO AUDIO | Readjust your volume via the remote control. |
|
| |||
|
| The TV’s tuner signal must not be lower than 65 %. |
|
| ||
|
| Turn off the TV, unplug it from the socket. Remove the batteries out of | ||||
|
| the remote for 30 minutes. | Press the remote buttons and the power | |||
REMOTE |
| button randomly for a good 2 seconds, and then reinstall the batteries. | ||||
CONTROL | Try the remote to see if it works. For battery removal instructions. | |||||
DOES NOT | The TV’s remote sensor is also housed in the same place as the power | |||||
WORK |
| indicator light. | Please make sure there is line of sight from the remote | |||
|
| control’s front sensor to the remote sensor of the TV. |
|
| ||
|
|
|
|
| ||
CANNOT |
| The TV’s tuner signal must not be lower than 65 | %. | Change the | ||
RECEIVE |
| direction of your antenna and rescan your channels. | If you have cable | |||
SUFFICIENT |
| call up your cable company and ask about signal strength of your local | ||||
CHANNELS |
| cable. |
|
|
|
|
THROUGH |
|
|
|
|
|
|
THE |
|
|
|
|
|
|
ATSC/NTSC |
|
|
|
|
|
|
TUNER |
|
|
|
|
|
|
|
| Please adjust your picture setup and make sure the saturation and the RGB | ||||
NO COLOR |
| are not turned all the way down. For adjustment controls. |
| |||
|
| The TV’s tuner signal must not be lower than 65 %. Check your signal. | ||||
WEAK SIGNAL | The TV’s tuner | signal must | not be lower than 65 | %. | Change the | |
OR | NO | direction of your antenna and rescan your channels. | If you have cable | |||
PROGRAM |
| call up your cable company and ask about signal strength of your local | ||||
SYMBOL | ON | cable. |
|
|
|
|
SCREEN |
|
|
|
|
|
|
TV’S |
| This television follows NEC’s universal remote code. | To find the | |||
UNIVERSAL | actual code you must read through your own universal remote’s guide | |||||
REMOTE |
| book. |
|
|
|
|
CODE |
|
|
|
|
|
|
|
|
| 27 |
|
|
|