Problems |
| Solutions |
|
|
| ||
TV CHANNELS | Check your auto lock function’s settings inside the OSD. | You may have locked | |||||
ARE BLOCKED | up some channels but forgot about them. |
|
|
| |||
UNIVERSAL | This TV follows NEC’s universal remote code. | Please check your hand book | |||||
REMOTE CODE | for NEC’s codes then apply them. |
|
|
| |||
THE TV TURNS | This TV is a High Definition liquid crystal display panel TV. | It requires a few | |||||
ON OR OFF |
| more seconds than normal TVs to power up and show the picture. | |||||
SLOWLY AND |
|
|
|
|
| ||
THE SCREEN |
|
|
|
|
| ||
SHOWS UP |
|
|
|
|
|
| |
SLOWLY |
|
|
|
|
|
| |
NO SOUND ON | Make sure you have a 3.5 mm | ||||||
PC |
|
| output to the TV’s VGA STEREO INPUT. |
|
|
| |
HDCP | VIDEO | Reboot your HDCP video device but turning them off and unplugging the power | |||||
SAYS NO | HDCP | cord. | Wait up to 8 minutes to plug the power back in to see if it works or not. | ||||
SUPPORT |
|
|
|
|
|
|
|
|
|
| Make sure you have a 3.5 mm | ||||
HDCP | VIDEO | device’s sound output to the TV’s VGA STEREO INPUT. | If your HDCP video | ||||
HAS NO AUDIO | device uses RCA AUDIO jacks, you’ll need to obtain a RCA audio converted | ||||||
|
|
| into 3.5 mm |
|
|
| |
CANNOT | GET | Make sure the TV is recognized as plug and play monitor. | Try updating your | ||||
1360X768 | ON | PC | video card’s drivers as well. If that does not help, most likely you’ll need to | ||||
VGA |
|
| upgrade your video card to a newer one. |
|
|
| |
PICTURE |
| IS | This | might be from interference from large | electrical | appliances, cars, | |
DISTORTED | OR | motorcycles, or fluorescent lights. If the TV is close to the wall, try moving the | |||||
HAS ABNORMAL | TV to another room in your house to see if the problem still occurs. | ||||||
SOUND |
|
|
|
|
|
|
|
|
|
| If you’re using HDMI or a TV digital channel make sure you use the ASPECT | ||||
|
|
| button to switch to 16:9 format. If you are using VGA, use the AUTO | ||||
|
|
| ADJUST function to adjust to the screen. Please Note : If you are using regular | ||||
PICTURE | DOES | analog TV, AV, or component in 480i resolution, use the ASPECT button to | |||||
NOT COVER THE | switch to 16:9 in order to fill up the screen. Please Note : This note this feature | ||||||
ENTIRE SCREEN | will distort the picture. |
|
|
| |||
|
|
|
|
|
|
|
|
28