Sansui HDLCDVD265 owner manual Labeling channels, Labeling video inputs, Setting the V-Chip

MUTE

Press MUTE to switch off the sound. The TV’s sound will be silenced and “Mute” will appear on the screen. The sound can be switched back on by pressing this button again or the VOL + or –.

SLEEP

To set the TV to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each press of the SLEEP but- ton (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to Off.

Sleep Timer

0h 10m

Labeling channels

Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.

You can choose any four characters to identify a channel.

To create channel labels

1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2 Press ▲ or ▼ to select “Channel”, then press ▶ or

ENTER.

3 Press ▲ or ▼ to select “Ch Label”, then press ▶ or ENTER.

The “Ch Label” menu will appear.

4 Press ◀ or ▶ to select a channel you want to label, then press ▼.

Ch Label

Channel Number	15-1
Ch Label
Label Clear	>>
: Select	: Adjust

	Press ◀ or ▶ repeatedly until the character you
5 want appears in the first space.
	Ch Label
		Channel Number	15-1
		Ch Label		A
		Label Clear	>>

: Select : Adjust ENTER:Set

The characters rotation as follows:

- , () @ / + = -

SPACE

If the character which you desire appears, press

ENTER.

Repeat this step to enter the rest of the characters.

If you would like a blank space in the label name, you must choose the empty space from the list of characters.

6 When you finish inputting the label name, press EXIT/CANCEL to return to the normal screen.

7 Repeat steps 4-5 for other channel.You can assign a label to each channel.

To clear a Ch Label

After step 4 above, press ▲ or ▼ to select “Label Clear”, then press ▶ or ENTER.

NOTE:

• The channel labels will be reset after “Automatic Search” on page 16.

Labeling video inputs

The Video Label feature allows you to label each input source for your TV.

1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2 Press ▲ or ▼ to select “Setup”, then press ▶ or

ENTER.

3 Press ▲ or ▼ to select “Video Label”, then press ▶ or ENTER.

4 Press ▲ or ▼ to select an input which you want to label.

5 Press ◀ or ▶ to select the desired label for that input source.

Video Label

Video 1	-
Video 2	-
Component	-
HDMI 1	-
HDMI 2	-

: Select : Adjust

–: Uses the default label name VCR : Video cassette recorder DVD : DVD video

DTV : Digital TV set-top box

SAT : Satellite box

CBL : Cable box

HD : HDMI device (only for HDMI inputs)

6 Press EXIT/CANCEL to return to the normal screen.

Setting the V-Chip

An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV Rating” and “Movie Rating” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password.

18