Sears 274.4372859 With a Satellite Receiver Basic Operation, Turn on Satellite Receiver, Turn off

Using Your TV and Remote

With a Satellite Receiver: Basic Operation

You may also be able to use the TV's remote with satellite receivers. Refer to your Satellite Receiver owner's manual to hook up your Satellite Receiver. The

remote may need to be programmed for some brands of satellite receivers, but may not operate all models of the brands listed below. Use the codes below or on the sheet packed in with your remote.

Follow the instructions below for basic operation of your receiver. You may also want to experiment with other buttons on the remote to see if they work with your receiver.

Program the remote for your

Satellite Receiver

			PEW	PLAY	FF
			REC	STOP	PAUSE
			r-wl
			DISPLAY		SKIP
Turn on	the	Satellite
Receiver
			MUTE	CHA_	PREV CH
			10	2 0	3 0
			4 0	B0	6 0
Turn off	the	Satellite		80
Receiver
			INPUTo	0 O	ANTENNAo
Satellite	Receiver		Codes	f_O0	RESEt.
			CLEAR
Chaparral			80,81
Cheyenne	...............................		81
Drake			82,83
DSS			00
General	Instruments		...92,93,94
RCA			00
Realistic	..................................		84
Sierra I,II,III			81
STS1			85
STS2			86
STS3			87
STS4			88
Toshiba	...................................		89
Uniden			90
Video Cipher		II	91

A. Point the remote at the satellite receiver and hold SAT.GABLE.

B. Enter the code for your brand from the code list below.

C. Release SAT-CABLE.

D. Press POWER. If nothing

happens, try pressing SAT,CABLE and then POWER.

A. Press SAT,CABLE to set the remote to control the satellite receiver.

B. Press POWER to turn on the receiver if it did not turn on when you pressed SAT,CABLE.

A. Press SAT, GABLE to set the remote to control the Satellite receiver.

B. Press POWER to turn off the receiver.

11