Using Your TV and Remote
With Remote Buttons
VCR2*LD AUDIO
O0
REW PLAYFF
POWER
Turns off the TV.
Turns off compatible VCRs.
Turns on a component after a component button is pressed.
AUDIO, VCR1, VCR2.LD,
REC (Record)
Starts recording onto tape.
STOP
Stops tape or laserdisc.
PAUSE
Pauses tape or laserdisc.
<21 E>
RECSTOPPAUSE
DISPLAYSKIP
MUTE |
| CHA_ | PREV CH |
4 0 | 5 | 0 | 6 0 |
INPUTQ | 0 | O | ANTENNAo |
CLEAR |
| ._ • ,o_ | RESET |
SAT.CABLE, TV
Sets the remote to control the
component. VCR2. LD can only be
programmed for one component: either a VCR or a Laserdisc Player.
See Using the Remote with a VCR, Satellite Receiver, Cable Box, Laserdisc
Player and Audio equipment on pages
TV
Turns on the TV.
Shows the displays on the screen. Sets the remote to control the TV.
See Using the Remote with a VCR, Satellite Receiver, Cable Box, Laserdisc Player and Audio equipment on pages
REW (Rewind)
Rewinds a tape or laserdisc.
Searches backward while tape or laserdisc is playing.
PLAY
Plays tape or laserdisc.
DISPLAY
Shows displays on the screen. Clears menus from the screen.
SKIP (Commercial Skip)
Allows you to scan other
channels during commercials.
Each press adds 30 seconds. TV switches back to original channel when time runs out. Press
CLEAR to cancel SKIP.
CHAN/_ and v (Channel up and down) Scans up and down through
channels in the TV's memory.
Moves through channels in VCR's memory.
VOL > and <
(Volume up and down) Raises and lowers sound.
MUTE
Switches the TV sound on or off.
PREV CH (Previous Channel)
FF (Fast Forward)
Fast forwards a tape or laserdisc.
Searches forward while tape or laserdisc is playing.
Changes back and forth between two channels.
Select a channel and then select another. Press PREV CH to switch between the two channels.