Setting TV
4 Setting SYSTEM
Press the [ 
, 
] button in the INSTALL screen to select “SYSTEM” if the automatic tuning did not already select this correct system.
Select a TV broadcasting type among EURO, E/EURO, FRANCE, and GB with [ 
, 
] button while the cursor points to SYSTEM.
5 Setting CHANNEL
Press the [ 
, 
] button in the INSTALL screen to select “CHANNEL”.
Select a channel with the [ 
, 
] button or [NUMBER] button while the cursor points to CHANNEL. Press the [OK] button to select either Cable or Air.
INSTALL
ATSS |
| GB |
| |
EDIT |
|
|
| |
SYSTEM |
| EURO |
| |
CHANNEL |
| C 05 |
| |
FREQUENCY |
| 175.25 |
| |
NAME |
| - - - - |
| |
PROGRAM |
| 03 |
| |
STORE TO |
| 03 |
| |
|
|
|
|
|
|
| Position | Adjust | |
| MENU Exit | 0...9 Adjust | ||
| OK Cable/Air | |||
6 Setting FREQUENCY
Press the [ 
, 
] button in the INSTALL screen to select “FREQUENCY”.
While the cursor points to FREQUENCY, you can start Manual Tuning by pressing the [ 
,
] button over 2 seconds. Also, you can start Fine Tuning step by step when you press the button quickly.
To save adjusted values, you should save PROGRAM with STORE TO after adjusting.
INSTALL
ATSS | GB |
EDIT |
|
SYSTEM | EURO |
CHANNEL | C 05 |
FREQUENCY | 175.25 |
NAME | - - - - |
PROGRAM | 03 |
STORE TO | 03 |
Position | Fine Tune |
0...9 | Adjust |
MENU Exit
7 Setting NAME
* STATION NAME is mapped as broadcasting ID. If there is no broadcasting ID, STATION NAME is displayed as “- - - - ”.
Press the [ 
, 
] button in the INSTALL screen to select “NAME”.
Enter the Modify mode by pressing the [ 
, 
] button while the cursor points to NAME.
Press the [ 
, 
] button, characters are displayed in order.
You can set a NAME consisting of 5 characters.
Press the [OK] button to save the settings.
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
Adjust Access
MENU Exit | OK Store |
20