Sansui TV19PL120DVD instruction manual Zooming/Locating Desired Scene, Zooming DVD/VCD

Chapter Time

Zooming/Locating Desired Scene

Zooming (DVD/VCD)

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

11

Press ZOOM during playback.

The centre part of the image will be zoomed in. Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0).

2

Press ▲/▼/B/A to view a different part of the frame.

You may move the frame from the centre position to UP, DOWN, LEFT or RIGHT direction.

3

In the zoom mode, press ZOOM repeatedly to return to a 1:1 view ( Off).

Note:

¥You can select the Pause or Slow in the zoom mode.

¥Some discs may not respond to zoom feature.

Locating Desired Scene (DVD/VCD/Audio

CD)

Use the title, chapter and time recorded on the DVD disc to locate the desired point to playback. In the case of VCD/Audio CD discs, time and track are used to locate the desired point to playback. To check the title, chapter/track and time, press .

1	Jump
	Title

Press JUMP during playback or resume stop mode.

2			Jump
			Title
Press ▲ or ▼ to select the ÒTitle /TrackÓ, ÒChapterÓ			Chapter
			Time
	or ÒTimeÓ.
	3		Jump
Press Number buttons (0–9)to input the number.			Title
			Chapter	12
¥		If you input a wrong number, press CANCEL.	Time
¥		Refer to the package supplied with the disc to check the numbers.

4

Press ENTER. Playback starts.

¥ When you change the title, playback starts from Chapter 1 of the selected title.

¥ Some discs may not work in the above operation.

Note:

¥In case of the Audio CD and Video-CD, only Track and Time can be selected.

¥In case of the Video-CD playback with PBC, the JUMP does not work. Turn off the PBC (see page 32).

36

50A0201A_p32-37.p65 36 9/12/07, 4:58 PM