Sansui SLED3280 Remote control, Power Button Used to turn the power on/off to the LCD TV

Page 10

Remote control

1

11

2

12

3

 

4

13

5

14

6

15

7

16

8

9 17

10

1.(POWER) Button - Used to turn the power on/off to the LCD TV.

2.DISPLAY Button - When you press this button, the current information will be displayed on a screen. To remove the display from the screen, press this button again.

3.Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV.

4.– Button -This button is the “–” button used when selecting digital channels.

5.MENU Button - Use to display the On-Screen menu function.

6.CURSOR ///Buttons - Used to operate the menu functions of the LCD TV.

7.MUTE Button - To turn off the sound, press this button once. The LCD TV will be silenced and the symbol “Mute” will appear on the screen. The muting feature can be released by pressing the MUTE button again or one of the VOL (VOLUME) + or buttons.

8.INPUT SELECT Button - Use to change the external input.

9.VOL (VOLUME) + / – Buttons - Press the + button to increase, or the button to decrease the sound level.

10.CCD Button - Used to display the Closed Caption menu screen.

11.PICTURE SIZE Button - Used to change the picture size.

12.SLEEP Button - To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control.

13.RECALL Button - This button allows you to go back to the previous channel selected by just pressing the RECALL button. Press this button again to return to the channel you were watching.

14.EXIT Button - Press to remove setup menu.

15.ENTER Button - Use to enter or select information for On-Screen operations.

16.AUDIO Button - Change soundtrack language.

17.CH (CHANNEL) / Buttons - To change the

channels of the LCD TV.

Before using the remote control, batteries must first be installed.

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.

Use two “AAA” size batteries. The batteries may last approximately one year depending on how much the remote control is used. For best performance, it is recommended that batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or different types.

2.Install two “AAA” batteries (supplied).

3.Replace the battery compartment cover.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in this device:

• Use only the size and type of batteries specified.

• Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

10

Image 10
Contents Customer Service SERVICE/SERVICE Clientèle Orion Website Site WEB OrionEnglish Location of the required MarkingVoltage surges and built-up static Wire to an antenna discharge unit, sizeTo provide some protection against Charges, of the NationalTune Into Safety Child SafetyIssue This Manufacturer CaresHOW to Handle the LCD Panel CondensationHow to attach the stand How to remove the standPower source FeaturesTo USE AC Power Contents Left side Right sideFront RearBattery Precautions Remote controlPower Button Used to turn the power on/off to the LCD TV Picture Size Button Used to change the picture sizeAntenna connections Cable TV connectionsTo connect to a DVD player with Component Video Input Connections to other equipmentTo connect the LCD TV to a VCR To connect the TV to a camcorder, or a TV GameRear of the unitSubwoofer Speaker Right Using an AV Amplifier with built-in digital surroundTo return to normal mode Rear of the unit Monitor Display modesTo connect an audio system To connect a Hdmi or a DVI device to the unitTo Hdmi To PC/DVI To Select Analog Channels PowerTo select the video input source To Select Digital ChannelsQuick guide for menu operation EnterIcon Selected Items Setup hint Convenience functionsAutomatic Search Memorizing channelsAir/Cable selection Adding ChannelTo create channel labels To change the password Setting the V-ChipTo register a password To set the V-ChipClosed Caption To clear the all V-Chip settingsCC advanced Setting the picture size Reception disturbances IgnitionTroubleshooting Symptoms Possible SolutionsAccessories SpecificationsGeneral This warranty does not cover Orion SALES, INC N. Union DRMemo