Connections to other equipment | (continued) |
To connect a HDMI or a DVI device to the unit
The HDMI1 input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.
When you connect to a DVI device with a
Rear of the unit
To HDMI IN
To PC/DVI
AUDIO IN
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
HDMI cable (type A connector)
(not supplied)
DVI device
or
HDMI device To HDMI out
NOTE:
• When using HDMI1/DVI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the image with no sound.
• If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component.
Should you require further instruction, please contact the manufacturer of the external component.
To connect an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote control.
To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s
Rear of the unit
To VAR AUDIO OUT
Amplifier
To Audio (L) Input 
To Audio (R) Input
Audio cord (not supplied)
NOTE:
• To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set above 0 (zero).
• For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the amplifier is at its highest level.
14