RCA CRT Television manual Setting TH E SAT/CABLE Channel Auto TU N I NG

2.Point to the choice that matches the way you have your DVD player connected to the TV.

3.Press MENU or OK to continue.

SETTING TH E SAT/CABLE CHANNEL

(AUTO TU N I NG)

The next step lets you set the SAT/CABLE channel. When you set the SAT/ CABLE channel, you're telling the TV what channel to tune to when you press the SAToCABLE button on the remote.

Indicate which input you used to connect a satellite receiver or a cable box. If you don't have a satellite receiver or cable box connected to the TV, skip this step or select Not Connected from the SAT/CABLE Channel choice list. (For more, see Auto Tuning in the Using the Menu System section.)

1.Press MENU or OK to bring up the SAT/CABLE choice list.

2, Point to the choice that matches the way you have your satellite receiver or cable box connected to the TV.

3.Press MENU or OK to continue.

If You Have Both a Satellite

Receiver and a Cable Box

Connected to the TV

The remote cannot control both a cable

box and the satellite receiver, if you choose to have the remote control the

satellite receiver, you must then use your cable box remote to control the cable box.

You may, however, prefer to use the satellite receiver remote for satellite

programming, and set your SAToCABLE button to control your cable box. It'syour choice.

19