RCA CRT Television manual Entering Setup, Point and Select

USING POINTAND SELECT

You only need to know one rule when using the remote to access on- screen menus and control panels: point and select. The point and select method has two steps.

1.Point to a menu item using the MOVE arrows on the remote.

To point up or down, press the up or down arrows. To point left or right, press the left or right arrows.

2.Select a menu item by pressing MENU or OK.

Selecting an item tells the TV'smenu system to go ahead and make the change or go to a place you have indicated.

ENTERING SETUP

The first screen of the interactive Setup appears automatically when you turn on your TV for the first time or after a power outage.

1.Press MENU to begin setup or CLEAR to exit.

You can also access the interactive Setup through the Main menu:

1.Press MENU to bring up the Main menu.

2.Point to Setup and press MENU or OK. The first Setup screen comes up, asking you to confirm that you want to begin.

MENU¢LEA_

Point and Select

buttons

You can also select a menu item by

entering the item number with the number buttons on the remote.

Press CLEAR at any time to remove all

displays from the screen and return to TV viewing.

Many VCR user manuals refer to a

PROGRAM button. The MENU button on this remote works as a PROGRAM button

in VCR mode. Other manuals may refer to a SELECTbutton. The OK button on this

remote works as a SELECT button.

12