Button Descriptions for TV Mode, Indicator

RCA 32V550T Button Descriptions for TV Mode, Button Descriptions for DVD and VCR Modes, Indicator

Chapter 2: Using the Remote Control

Indicator

Button Descriptions for TV Mode

DVD

ON OFF

Arrows Used to highlight different items in the TV menu and to adjust the menu controls.

VCR

VOL

MUTE GO BACK

CLEAR	MENU
	OK
PRESETS	SKIP
VPORT	INFO

GUIDE

123

45 6

78 9

INPUT

ANTENNA

REVERSE	PLAY	FORWARD
RECORD	STOP	PAUSE
AGAIN	ZOOM	OPEN CLOSE

SPEED SEARCH

Indicator Indicates the programming mode when programming the remote to control components. Lights when you press a valid button on the remote. Flickers when a button is pressed and the batteries are low.

(0-9) Number Buttons Enter channel numbers and time settings directly through the remote control.

To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press the two digits and expect a few seconds delay. This is if you want to enter a third digit.

CH + or CH - Scans up or down through the current channel list. Press once to change the channel up or down; press and hold to continue changing channels.

CLEAR Removes any menu or display from the screen and returns you to normal viewing.

GO BACK Returns you to the previous channel.

INFO Brings up the channel banner.

INPUT Toggles through the available input sources (VID1/SVID1, VID2/CVID2, FRNT, VPORT and current channel).

MENU Brings up the Main menu.

MUTE Reduces the TVÕs volume to its minimum level. Press again to restore the volume.

OK When in the menu system, selects highlighted items.

ON•OFF When in TV mode, turns the TV on and off. If in another mode (VCR, DVD, etc.) and programmed, will turn the component on and off.

PRESETS Picture options are reset to original factory settings.

SKIP Press once before changing channels and the TV will wait 30 seconds before returning to the original channel. Press repeatedly to add more time.

TV Turns on the TV and puts the remote in TV mode. Also displays current status.

VOL – or VOL + Decreases or increases the TVÕs volume.

VPORT Tunes the TV to the VPORT input channel. You can program this button to control a VCR or DVD player. When programmed, changes the mode of the remote when the button is pressed. To restore the VPORT button to factory default mode (unprogrammed), press and hold VPORT, then press 1, 0, 0, and 0.

Button Descriptions for DVD and VCR Modes

AGAIN In DVD mode, replays the last several seconds of the title youÕre playing.

ANTENNA In VCR mode, functions as a TV/VCR button.

DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on the TV and tune to the correct video input channel.

GUIDE If youÕre operating another component that has a guide, this button accesses the on-screen Guide.

Chapter 2

Graphics contained within this publication are for representation only.