Sony SLV-SF900G manual Additional tasks, To play an NTSC-recorded tape, To use the time counter

3

PLAY

OK

Press H PLAY.

When the tape reaches the end, it will rewind automatically.

Additional tasks

To	Press
Stop play	x STOP
Pause play	X PAUSE
Resume play after pause	X PAUSE or H PLAY
Fast-forward the tape	M FF during stop
Rewind the tape	m REW during stop
Eject the tape	Z EJECT

To play an NTSC-recorded tape

Set NTSC PB at the rear of the VCR according to the colour system of your TV.

When your TV is	Set NTSC PB to
PAL only	ON PAL TV
PAL and NTSC	NTSC 4.43

To use the time counter

Press CLEAR at the point on the tape that you want to find later. The counter in the display window resets to “0:00:00.” Search for the point afterwards by referring to the counter.

38

OPC VIDEO

VPS

PDC

EDIT H M S

To display the counter on the TV screen, press DISPLAY.

Notes

•The counter resets to “0:00:00” whenever a tape is reinserted.

•The counter stops counting when it comes to a portion with no recording.

•Depending on your TV, the following may occur while playing an NTSC-recorded tape:

–The picture becomes black and white.

–The picture shakes.

–No picture appears on the TV screen.

–Black streaks appear horizontally on the TV screen.

–The colour density increases or decreases.

•If you playback a tape in LP or EP mode with the NTSC system, the sound is heard in monaural.

•While setting the menu on the TV screen, you cannot use M/m/</, buttons for tape operation.

Playing a tape