Sony SLV-SF900G manual Press To highlight the item you, Want to change, Press M/m to reset it

EXIT : MENU

3

PLAY

OK

Press OK.

The date, start and stop times, programme position, tape speed, and VPS/PDC setting appear on the TV screen.

If “– –” appears in the “PROG.” (programme) column (this may happen for local broadcasts), you have to set the appropriate programme position manually.

TIMER			2 8 . 9 THU
DATE		TIME		PROG.
TODAY		2 0 : 0 0	2 1 : 0 0	AAB
SP / LP	SP		VPS / PDC	OFF
LIST

SELECT :

SET :

CANCEL : CLEAR

EXIT : MENU

•To select a terrestrial channel.

Press M/m to select the desired programme position.

•To select a video source from the LINE-1 (TV) or LINE-3 IN connector, or the LINE-2 IN jacks.

Press INPUT SELECT to select the desired video source.

You will only have to do this operation once for the referred channel. The VCR will then store your setting.

For details about the VPS/PDC function, see “Timer recording with VPS/

CLEAR PDC signals” on page 47.

If the information is incorrect, press CLEAR to cancel the setting.

4

5

	If you want to change the date, tape speed,
	and the VPS/PDC function setting:			TIMER			2 8 . 9 THU
PLAY
OK	1	Press	</, to highlight the item you	DATE		TIME		PROG.
				TODAY		2 0 : 0 0	2 1 : 0 0	AAB
		want to change.		SP / LP	SP		VPS / PDC	OFF
				LIST

2 Press M/m to reset it.

SELECT :

SET :

CANCEL : CLEAR

• To record the same programme every day or the same day every week, see “Daily/weekly recording” on page 47.

•To use the VPS/PDC function, set VPS/PDC to ON. For details about the VPS/PDC function, see “Timer recording with VPS/PDC signals” on page 47.

•To change the setting, press MENU, and highlight LIST, then select TIMER LIST and press OK. Then enter the new timer setting and press

CLEAR

OK.

If the information is not correct, press CLEAR to cancel the settings.

MENU Press MENU to exit the menu.

46

Recording TV programmes using the VIDEO Plus + system