Sony CS SLV-998HF MX manual Normal display Automatic clock setting

Step 3: Hookups (continued)

5Enter your DSS receiver code number and press

CURSOR . For details, see page 40.

SET UP					CABLE BOX
CABLE BOX CONTROL
CABLE MOUSE				ON		OFF
BOX CODE NO.				-- -- --
BOX OUTPUT CH				CH3
Enter	your	CABLE BOX
Code	No.	Using	0 - 9		keys
Refer	to the Operating
Manual	for	the	Code

6Set your DSS receiver output channel (BOX OUTPUT CH) to LINE and press OK.

SET UP			CABLE BOX
CABLE BOX CONTROL
CABLE MOUSE			ON		OFF
BOX CODE NO.			-- -- --
BOX OUTPUT CH			CH3
Use	to	select		CABLE
Box CH.	Then	push OK

SET UP

SET UP is done

Normal display

Automatic clock setting

Once you've set up the VCR, it automatically sets the clock the first time you turn off the VCR. After that, whenever you turn off the VCR, it checks the time and adjusts the clock, even for Daylight Saving Time. The VCR sets the clock by picking up a time signal provided by some TV channels.

If you want to use the timer to record right away, or if the channels in your areas do not carry time signals, set the clock manually. For details, see page 37.

Note

*To successfully record a program from the DSS receiver, proceed as follows:

-Leave the DSS receiver on all the time.

-Turn off the display (menu screen, channel number, etc.) of the DSS receiver.

-To record or receiver locked channels, unlock the channel before the VCR starts recording.

-To set pay-per-view programs in the timer setting, order the pay-per-view program before the VCR starts recording.

-Some programs are copy protected. You cannot record these programs.

26

Getting started