SMC Networks SMC8612XL3 F 1.0.1.3 manual Displaying Global Settings, 127

SPANNING TREE ALGORITHM CONFIGURATION

therefore only forwarded between root ports and designated ports, eliminating any possible network loops.

Designated

Root

x	x		Designated x
		Designated	Port
x
		Bridge	x

Root Port

Once a stable network topology has been established, all bridges listen for Hello BPDUs (Bridge Protocol Data Units) transmitted from the Root Bridge. If a bridge does not get a Hello BPDU after a predefined interval (Maximum Age), the bridge assumes that the link to the Root Bridge is down. This bridge will then initiate negotiations with other bridges to reconfigure the network to reestablish a valid network topology.

RSTP is designed as a general replacement for the slower, legacy STP. RSTP achieves must faster reconfiguration (i.e., around one tenth of the time required by STP) by reducing the number of state changes before active ports start learning, predefining an alternate route that can be used when a node or port fails, and retaining the forwarding database for ports insensitive to changes in the tree structure when reconfiguration occurs.

Displaying Global Settings

You can display a summary of the current bridge STA information that applies to the entire switch using the STA Information screen.

Field Attributes

•Spanning Tree State – Shows if the switch is enabled to participate in an STA-compliant network.

•Bridge ID – A unique identifier for this bridge, consisting of the bridge priority and MAC address (where the address is taken from the switch system).

3-127