SMC Networks SMC8612XL3 F 1.0.1.3 manual Host Show users

COMMAND LINE INTERFACE

Command	Function	Mode	Page
ip ssh crypto	Generates the host key	PE	3-52
host-key generate
ip ssh crypto	Clear the host key from RAM	PE	3-53
zeroize
ip ssh save	Saves the host key from RAM to flash memory	PE	3-54
host-key
disconnect	Terminates a line connection	PE	3-25
show ip ssh	Displays the status of the SSH server and the	PE	3-54
	configured values for authentication timeout and
	retries
show ssh	Displays the status of current SSH sessions	PE	3-55
show public-key	Shows the public key for the specified user or for the	PE	3-56
	host
show users	Shows SSH users, including privilege level and public	PE	3-83
	key type

The SSH server on this switch supports both password and public key authentication. If password authentication is specified by the SSH client, then the password can be authenticated either locally or via a RADIUS or TACACS+ remote authentication server, as specified by the authentication login command on page 3-93.If public key authentication is specified by the client, then you must configure authentication keys on both the client and the switch as described in the following section. Note that regardless of whether you use public key or password authentication, you still have to generate authentication keys on the switch and enable the SSH server.

To use the SSH server, complete these steps:

1.Generate a Host Key Pair – Use the ip ssh crypto host-key generate command to create a host public/private key pair.

2.Provide Host Public Key to Clients – Many SSH client programs automatically import the host public key during the initial connection setup with the switch. Otherwise, you need to manually create a

4-46