IP R
OUTING
C
OMMANDS
-129

clear ip route

Use this command to remove dynamically learned entries from the IP
routing table.
Syntax
clear ip route {network [netmask] | *}
•network – Network or subnet address.
•netmask - Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
•* – Removes all dynamic routing table entries.
Command Mode
Privileged Exec
Command Usage
• This command only clears dynamically learned routes.
•Use the no ip address command to remove a local interface.
•Use the no ip route command to remove a static route.
Example

show ip route

Use this command to display information in the IP routing table.
Syntax
show ip route [config | address [netmask]]
•config – Displays all static routing entries.
•address – IP address of the destination network, subnetwork or host
for which routing information is to be displayed.
•netmask - Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
Command Mode
Privileged Exec
Console#clear ip route 10.1.5.0
Console#