DESCRIPTION OF SOFTWARE FEATURES

redundancy by taking over the load if a port in the trunk should fail. The switch supports up to 6 trunks.

Broadcast Storm Control – Broadcast suppression prevents broadcast traffic from overwhelming the network. When enabled on a port, the level of broadcast traffic passing through the port is restricted. If broadcast traffic rises above a pre-defined threshold, it will be throttled until the level falls back beneath the threshold.

Static Addresses – A static address can be assigned to a specific interface on this switch. Static addresses are bound to the assigned interface and will not be moved. When a static address is seen on another interface, the address will be ignored and will not be written to the address table. Static addresses can be used to provide network security by restricting access for a known host to a specific port.

IEEE 802.1D Bridge – The switch supports IEEE 802.1D transparent bridging. The address table facilitates data switching by learning addresses, and then filtering or forwarding traffic based on this information. The address table supports up to 16K addresses.

Store-and-Forward Switching – The switch copies each frame into its memory before forwarding them to another port. This ensures that all frames are a standard Ethernet size and have been verified for accuracy with the cyclic redundancy check (CRC). This prevents bad frames from entering the network and wasting bandwidth.

To avoid dropping frames on congested ports, the switch provides 1 MB for frame buffering. This buffer can queue packets awaiting transmission on congested networks.

Spanning Tree Protocol – The switch supports these spanning tree protocols:

Spanning Tree Protocol (STP, IEEE 802.1D) – This protocol adds a level of fault tolerance by allowing two or more redundant connections to be created between a pair of LAN segments. When there are multiple physical

1-5

Page 30 Page 32
Page 31
Image 31
SMC Networks SMC8612XL3 F 1.0.1.3 manual Description of Software Features
Page 30 Page 32

SMC8612XL3 F 1.0.1.3 specifications

SMC Networks has long been a reliable name in the networking equipment space, and the SMC8612XL3 F 1.0.1.3 is a testament to its commitment to providing high-quality and dependable networking solutions. This device is particularly designed for home and small business networking, offering a blend of performance, versatility, and ease of use.

One of the main features of the SMC8612XL3 F 1.0.1.3 is its advanced IPv6 support, which ensures that users are prepared for the next generation of Internet protocols. This is increasingly important as more devices connect to the Internet, requiring efficient and expanded addressing schemes that IPv6 offers. The device is also equipped with robust firewall capabilities to bolster network security, protecting user data against threats from the open internet.

The SMC8612XL3 F 1.0.1.3 boasts an impressive range of connectivity options, including multiple Ethernet ports that allow for wired connections at gigabit speeds. This high-speed functionality is crucial for users who require stable and fast internet access, especially for activities such as gaming, streaming, and large file transfers. The built-in switch enhances the device’s functionality by allowing users to connect several devices with ease.

One of the notable characteristics of the SMC8612XL3 F 1.0.1.3 is its user-friendly interface, which simplifies configuration and management. Users can easily set up the network, adjust settings, and monitor performance through an intuitive web-based management system. The device also supports Quality of Service (QoS) features, helping prioritize bandwidth for essential applications, which is particularly beneficial in environments with multiple connected devices.

Additionally, the SMC8612XL3 F 1.0.1.3 features dynamic DNS support, making remote access to network resources straightforward. This is particularly advantageous for users who need to access home or business networks while away.

Overall, the SMC Networks SMC8612XL3 F 1.0.1.3 stands out for its advanced features, including IPv6 support, robust security measures, and exceptional performance capabilities. It is an ideal choice for consumers looking for a reliable and efficient networking solution that can meet the demands of today’s increasingly connected world. Whether for personal use or small business applications, this device is engineered to provide users with a seamless and secure networking experience.
Top Page Image Contents