SMC Networks SMC8612XL3 F 1.0.1.3 manual A, 3-65

U SER A UTHENTICATION
3-65
Web – Select Security, 802.1x, Configuration. Enable dot1x globally for the
switch, modify any of the parameters required, and then click Apply.
CLI – This enables re-authentication and sets all of the global parameters
for dot1x.
Configuring Port Authorization Mode
When dot1x is enabled, you need to specify the dot1x authentication mode
configured for each port.
Command Attributes
•Status – Indicates if authentication is enabled or disabled on the port.
• Operation Mode – Allows single or multiple hosts (clients) to connect
to an 802.1X-authorized port. (Range: Single-Host, Multi-Host;
Default: Single-Host)
• Max Count – The maximum number of hosts that can connect to a
port when the Multi-Host operation mode is selected. (Range: 1-20;
Console(config)#dot1x re-authentication3-108
Console(config)#dot1x max-req 53-105
Console(config)#dot1x timeout quiet-period 403-108
Console(config)#dot1x timeout re-auth 53-109
Console(config)#dot1x timeout tx-period 403-109
Console(config)#authentication dot1x default radius3-105
Console(config)#