-116

IP Interface Commands
There are no IP addresses assigned to this router by default. You must
manually configure a new address to manage the router over your network
or to connect the router to existing IP subnets. You may also need to a
establish a default gateway between this device and management stations
or other devices that exist on another network segment (if routing is not
enabled).
This section includes commands for configuring IP interfaces, the Address
Resolution Protocol (ARP) and Proxy ARP. These commands are used to
connect subnetworks to the enterprise network.

Basic IP Configuration

ip address

This command sets the IP address for the currently selected VLAN
interface. Use the no form to restore the default IP address.
Command Group Function Pag
e
Basic IP
Configuration
Configures the IP address for interfaces and the gateway
router
3-11
6
Address Resolution
Protocol (ARP)
Configures static, dynamic and proxy ARP service 3-12
2
Command Function Mod
e
Page
ip address Sets the IP address for the current interface IC 3-116
ip default-gateway Defines the default gateway through which this router
can reach other subnetworks
GC 3-118
show ip interface Displays the IP settings for this device PE 3-119
show ip redirects Displays the default gateway configured for this device PE 3-120
ping Sends ICMP echo request packets to another node on
the network
NE,
PE
3-120