M
ULTICAST
R
OUTING
C
OMMANDS
-195
Default Setting
5 seconds
Command Mode
Router Configuration
Example

prune-lifetime

Use this command to specify how long a prune state will remain in effect
for a multicast tree. Use the no form to restore the default value.
Syntax
prune-lifetime seconds
seconds - Prune state lifetime. (Range: 1-65535)
Default Setting
7200 seconds
Command Mode
Router Configuration
Command Usage
This command sets the prune state lifetime. After the prune state
expires, the router will resume flooding multicast traffic from the
multicast source device.
Example
Console(config-router)#flash-update-interval 10
Console(config-router)#
Console(config-router)#prune-lifetime 5000
Console(config-router)#