C

LASS

OF

S

ERVICE

C
ONFIGURATION
3-175

priorities to the traffic classes (i.e., output queues) for the selected

interface, then click Apply.

CLI – The following example shows how to change the CoS assignments

to a one-to-one mapping.

* Mapping specific values for CoS priorities is implemented as an interface configuration
command, but any changes will apply to the all interfaces on the switch.
Console(config)#interface ethernet 1/13-1
Console(config)#queue cos-map 0 0 3-81
Console(config)#queue cos-map 1 1
Console(config)#queue cos-map 2 2
Console(config)#exit
Console#show queue cos-map ethernet 1/13-84
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 0 1 2 3 4 5 6 7
Information of Eth 1/2
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 0 1 2 3 4 5 6 7
.
.
.