SMC Networks SMC8612XL3 F 1.0.1.3 L, I, 4-162

C OMMAND L INE I NTERFACE
4-162
•high-address - The last IP address in an excluded address range.
Default Setting
All IP pool addresses may be assigned.
Command Mode
Global Configuration
Example
ip dhcp pool
Use this command to configure a DHCP address pool and enter DHCP
Pool Configuration mode. Use the no form to remove the address pool.
Syntax
ip dhcp pool name
no ip dhcp pool name
name - A string or integer. (Range: 1-8 characters)
Default Setting
DHCP address pools are not configured.
Command Mode
Global Configuration
Usage Guidelines
•
After executing this command, the switch changes to DHCP Pool
Configuration
mode, identified by the (config-dhcp)# prompt.
• From this mo de, first configure address pools for the network
interfaces (using the network command). You can also manually bind
an address to a specific client (with the host command) if required. You
can configure up to 8 network address pools, and up to 32 man ually
bound host address pools (i.e., listing one host address per pool).
However, note that any address specified in a host command must fall
Console(config)#ip dhcp excluded-address 10.1.0.19
Console(config)#