M
ULTICAST
R
OUTING
C
OMMANDS
-185
Multicast routers use snooping and query messages, along with a multicast
routing protocol to deliver IP multicast packets across different
subnetworks. This router supports both the Distance-Vector Multicast
Routing Protocol (DVMRP) and Protocol Independent Multicasting
(PIM). (Note that you should enable IGMP for any interface that is using
multicast routing.)
Static Multicast Routing Commands

ip igmp snooping vlan mrouter

Use this command to statically configure a multicast router port. Use the
no form to remove the configuration.
Syntax
ip igmp snooping vlan vlan-id mrouter interface
no ip igmp snooping vlan vlan-id mrouter interface
vlan-id - VLAN ID (Range: 1-4094)
Command Groups Function Page
Static Multicast
Routing
Configures static multicast router ports 3-185
General Multicast
Routing
Enables IP multicast routing globally; also displays the IP
multicast routing table created from static and dynamic
routing information
3-187
DVMRP Multicast
Routing
Configures global and interface settings for DVMRP 3-191
PIM-DM Multicast
Routing
Configures global and interface settings for PIM-DM 3-202
Command Function Mode Page
ip igmp snooping vlan
mrouter
Adds a multicast router port GC 3-185
show ip igmp snooping
mrouter
Shows multicast router ports PE 3-186