C
ONFIGURING
THE
S
WITCH
3-116
Web - Click Rate Limit, Input/Output Port/Trunk Co nfiguration. Set the
Input Rate Limit Status or Output Rate Limit Status, then set the rate limit
for the individual interfaces, and click Apply.
CLI - This example sets the rate limit for input and output traffic passing
through port 1 to 600 Mbps.
Showing Port Statistics
You can display standard statistics on network traffic from the Interfaces
Group and Ethernet-like MIBs, as well as a detailed breakdown of traffic
based on the RMON MIB. Interfaces and Ethernet-like statistics display
errors on the traffic passing through each port. This information can be
used to id entify potenti al prob lems wi th the s witch (s uch as a f aulty p ort or
unusually heavy loading). RMON statistics provide access to a broad range
of statistics, including a total count of different frame types and sizes
passing through each port. All values displayed have been accumulated
Console(config)#interface ethernet 1/13-1
Console(config-if)#rate-limit input 6003-19
Console(config-if)#rate-limit output 600
Console(config-if)#