SMC Networks SMC8612XL3 F 1.0.1.3 manual Command Groups, Command Group Description

COMMAND GROUPS

Command Groups

The system commands can be broken down into the functional groups shown below.

Command Group	Description	Page
Line	Sets communication parameters for the serial port and	3-15
	Telnet, including baud rate and console time-out
General	Basic commands for entering privileged access mode,	3-27
	restarting the system, or quitting the CLI
System Management	Controls system logs, system passwords, user name,	3-33
	browser management options, and a variety of other
	system information
Flash/File	Manages code image or switch configuration files	3-85
Authentication	Configures logon access using local or remote	3-92
	authentication; also configures port security and IEEE
	802.1x port access control
Access Control List	Provides filtering for IP frames (based on address,	3-113
	protocol, TCP/UDP port number or TCP control code)
	or non-IP frames (based on MAC address or Ethernet
	type)
SNMP	Activates authentication failure traps; configures	3-147
	community access strings, and trap managers; also
	configures IP address filtering
DHCP	Configures DHCP client, relay and server functions	3-155
DNS	Configures DNS services.	3-176
Interface	Configures the connection parameters for all Ethernet	3-1
	ports, aggregated links, and VLANs
Mirror Port	Mirrors data to another port for analysis without affecting	3-16
	the data passing through or the performance of the
	monitored port
Rate Limiting	Controls the maximum rate for traffic transmitted or	3-18
	received on a port
Link Aggregation	Statically groups multiple ports into a single logical trunk;	3-20
	configures Link Aggregation Control Protocol for port
	trunks

4-13