Universal Remote Control URC-WR7 manual You can program up to 20 commands on each Macro button

STEP 3: Using the Number Pad, punch in the Channel number of the Favorite Channel that you want to store in the Macro button.

The CABLE/SAT component LED light will blink once for each button pressed.

STEP 4: Press the CHANNEL UP [CH ] button to store the commands entered. The [CABLE/SAT] component LED will blink three times to confirm the programming.

CHANNEL

UP

Notes regarding programming multi-commands to Macro buttons:

•You can program up to 20 commands on each Macro button.

•You can program delays in between com- mands by pressing the [PAUSE] button. Each press adds a one-half second delay.

•Also, if you add the delay time as the first step of Macro commands, the remote will not send the Macro unless the button is held for two seconds. (This is the Press & Hold Function).

•You can also program macro commands in “layers” by pressing the [STOP] button in between commands. (For example, if you press [009], [STOP], [035], [STOP], [365], [STOP] in Step 3 of the Favorite Channel programming process) the remote will send out 009 at the first press of the selected [My Favorites] button, and then send out 035 at the second press, etc.

• You cannot program the [CH ] or [PAUSE] buttons as macro commands.

Page 24