Erasing All Learned Commands from One Component
This function allows you to erase all the learned commands from one component. For example, if you want to erase all learned commands on the TV component button because you bought a new TV, the process is very simple.
STEP 1: Press the component button where all the learned commands are stored and the [ENTER] button at the same time for two sec- onds until the component LED turns on.
IMPORTANT: You have 30 seconds to perform the next step while you are in pro- gramming mode. If you do not press a but- ton within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 2: Press and hold both the component button you want to erase and the [PAUSE] but- ton at the same time for two seconds, until the component LED light blinks twice to confirm the erasure.
COMPONENT
BUTTONS
PAUSE
ENTER
STEP 3: To exit Erase mode, press and hold both the component button and the [ENTER] button at the same time until the component LED light blinks three times.
Page 31