STEP 2: Press the VOLUME UP [VOL ] but- ton and then press either the TV or AUDIO com- ponent button that you want to use for volume.
The Component LED light will blink three times to confirm that it is saved. This sets up three but- tons (Volume Up, Volume Down and MUTE) as a group for that component.
VOLUME
UP
Repeat Steps 1-2 for all other components.
Note: SimpleSound is what’s technically referred to as a “Punch Through” feature and is not limited to volume control. It can also be applied to other groups of buttons. If you find yourself switching to a particular component mode frequently to access a particular control, consider using Punch Through.
Page 26
