Erasing MacroPower & Other Macro Commands
STEP 1: To erase MacroPower commands on the POWER [ON] or [SYSTEM OFF] but- ton, press and hold either the POWER [ON] or [SYSTEM OFF] button and the [MUTE] button simultaneously for two seconds until the current status component LED turns on.
IMPORTANT: If you don’t proceed to the next step within 30 seconds, the LED will turn off and exit
STEP 2: Press the CHANNEL UP [CH | ] |
button to erase and exit Erase mode. The |
|
component LED light will blink three times | to |
confirm the erasure. |
|
POWER
ON
SYSTEM
OFF
CHANNEL
MUTE UP
NOTE: To erase other Macros, simply press the appropriate button in Step 1 in combina- tion with the [MUTE] button.
Page 32
