C
OMMAND
L
INE
I
NTERFACE
4-134
acl_name – Name of the ACL. (Maximumle ngth:16 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• An egress ACL must contain all deny rules.
• When you create a new ACL or enter configuration mode for an
existing ACL, use the permit or deny command to add new rules to
the bottom of the list. To create an ACL, you must add at least one rule
to the list.
•To remove a rule, use the no permit or no deny command followed
by the exact text of a previously configured rule.
• An ACL can contain up to 32 rules.
Example
Related Commands
permit, deny 3-134
mac access-group (3-142)
show mac access-list (3-136)

permit, deny (MAC ACL)

This command adds a rule to a MAC ACL. The rule filters packets
matching a specified MAC source or destination address (i.e., physical layer
address), or Ethernet protocol type. Use the no form to remove a rule.
Syntax
[no]
{
permit
|
deny
}
{
any
|
host
source
|
source address-bitmask
}
{
any
|
host
destination
|
destination address-bitmask
}
Console(config)#access-list mac jerry
Console(config-mac-acl)#