IP ROUTING

-The transmit delay must be the same for all routers in an autonomous system.

-On slow links, the router may send packets more quickly than devices can receive them. To avoid this problem, you can use the transmit delay to force the router to wait a specified interval between transmissions.

•Retransmit Interval – Sets the time between resending link-state advertisements. (Range: 1-65535 seconds; Default: 1)

-A router will resend an LSA to a neighbor if it receives no acknowledgment. The retransmit interval should be set to a conservative value that provides an adequate flow of routing information, but does not produce unnecessary protocol traffic. Note that this value should be larger for virtual links.

-Set this interval to a value that is greater than the round-trip delay between any two routers on the attached network to avoid unnecessary retransmissions.

•Hello Interval – Sets the interval between sending hello packets on an interface. (Range: 1-65535 seconds; Default: 10)

-This interval must be set to the same value for all routers on the network.

-Using a smaller Hello interval allows changes in the network topology to be discovered more quickly, but may result in more routing traffic.

•Rtr Dead Interval – Sets the interval at which hello packets are not seen before neighbors declare the router down. This interval must be set to the same value for all routers on the network. (Range: 1-65535 seconds; Default: 40, or 4 times the Hello Interval)

•Cost – Sets the cost of sending a packet on an interface, where higher values indicate slower ports. (Range: 1-65535; Default: 1)

-This router uses a default cost of 1 for all ports. Therefore, if you install a Gigabit module, you need to reset the cost for all of the 100 Mbps ports to some value greater than 1.

3-299

Page 352 Page 354
Page 353
Image 353
SMC Networks SMC8612XL3 F 1.0.1.3 manual 299
Page 352 Page 354

SMC8612XL3 F 1.0.1.3 specifications

SMC Networks has long been a reliable name in the networking equipment space, and the SMC8612XL3 F 1.0.1.3 is a testament to its commitment to providing high-quality and dependable networking solutions. This device is particularly designed for home and small business networking, offering a blend of performance, versatility, and ease of use.

One of the main features of the SMC8612XL3 F 1.0.1.3 is its advanced IPv6 support, which ensures that users are prepared for the next generation of Internet protocols. This is increasingly important as more devices connect to the Internet, requiring efficient and expanded addressing schemes that IPv6 offers. The device is also equipped with robust firewall capabilities to bolster network security, protecting user data against threats from the open internet.

The SMC8612XL3 F 1.0.1.3 boasts an impressive range of connectivity options, including multiple Ethernet ports that allow for wired connections at gigabit speeds. This high-speed functionality is crucial for users who require stable and fast internet access, especially for activities such as gaming, streaming, and large file transfers. The built-in switch enhances the device’s functionality by allowing users to connect several devices with ease.

One of the notable characteristics of the SMC8612XL3 F 1.0.1.3 is its user-friendly interface, which simplifies configuration and management. Users can easily set up the network, adjust settings, and monitor performance through an intuitive web-based management system. The device also supports Quality of Service (QoS) features, helping prioritize bandwidth for essential applications, which is particularly beneficial in environments with multiple connected devices.

Additionally, the SMC8612XL3 F 1.0.1.3 features dynamic DNS support, making remote access to network resources straightforward. This is particularly advantageous for users who need to access home or business networks while away.

Overall, the SMC Networks SMC8612XL3 F 1.0.1.3 stands out for its advanced features, including IPv6 support, robust security measures, and exceptional performance capabilities. It is an ideal choice for consumers looking for a reliable and efficient networking solution that can meet the demands of today’s increasingly connected world. Whether for personal use or small business applications, this device is engineered to provide users with a seamless and secure networking experience.
Top Page Image Contents