Panasonic DMR-EA38V warranty Setup Menus, Box Type, then OK, IR Settings

Setup Menus

“Accessing the Setup Menu”

You will have to perform the following step 1 for all other operations on pages 52−60.

With the unit stopped

SETUP

Notes

Changed settings remain intact even when switching the unit to standby.

Tips

To return to the previous screen

Press [RETURN]. Even if you have changed an option, the change is not activated until you press [OK].

To exit the screen

Press [RETURN] several times.

IR Settings

Allow the set top box connected to this unit to be recognized by this unit.

If the set top box setup is changed, carry out “Test” ( right) to check whether or not the Set Top Box Control operates correctly.

Perform step 1 of “Accessing the Setup Menu” ( above).

,  to select “Setup” then 

,  to select “IR Settings”, then

OK

IR Settings

Select whether or not the set top box connected to this unit is controlled by this unit.

After selecting “IR Settings” ( above, step 3).

,  to select “Cable Box/DVR”, “Satellite Box/DVR”, “Converter Box” or “IPTV/Other STBs”, then OK

Brand Name

Select the set top box brand

After selecting “IR Settings” ( left, step 3).

,  to select “Brand Name”, then OK

, , ,  to select the set top box brand, then OK

–You can also use [] or [] to view other pages.

Max. CH digits

Select the maximum number of channel digits to be entered in your set top box.

After selecting “IR Settings” ( left, step 3).

,  to select “Max. CH digits”, then OK

,  to select “Max. 2 Digit Channel (CH xx)”, “Max. 3 Digit Channel (CH xxx)” or “Max. 4 Digit Channel (CH xxxx)” ,then OK

This must not be selected when “Converter Box” is selected for “STB (Set Top Box) Type” ( left).

,  to select “IR Settings”, then

OK

,  to select “On” or “Off”, then

OK

,  to select “Yes” or “No”, then

OK

STB (Set Top Box) Type

Select the service being used

After selecting “IR Settings” ( above, step 3).

	,  to select “STB (Set Top
52	Box) Type”, then OK

OK Key Operation

Select whether or not the selected channel is confi rmed by pressing [OK] in accordance with your Set top box.

After selecting “IR Settings” (	left, step 3).
, to select “OK Key Operation”, then		OK
, to select “On” or “Off”, then		OK
Test
After selecting “IR Settings” (	left, step 3).

,  to select “Test”, then OK

– Confi rmation screen appears.

OK

–Perform steps 8 and 9 on page 11

RQT9058