Check, change or delete a programme

≥Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].

Press [PROG/CHECK].

Timer	Remain	HDD	30:24 SP	DVD	1:58 SP
Recording				TUE 14.10.09. 12:54:00
No. Channel	Date	Start	HDD	Mode	Drive
No. Channel	Date	Start	Stop DVD	Mode	space

New Timer Programme

Press OK to store new programme.

RETURN

AIcons

FTimer recording standby is activated. [ This programme is currently recording.

Programmes are overlapped. Recording of the programme with the later start time starts when the earlier programme finishes recording.

You stopped a daily or weekly timer recording. The icon disappears the next time the timer programme starts recording.

The disc was full so the programme failed to record.

The programme was copy-protected so it was not recorded.

XThe programme did not complete recording because the disc is dirty or some other reason.

Timer programmes set to Auto Renewal Recording (> 24).

Titles that have been rerouted to the HDD (Displayed while recording.)

HDD Recording drive is set to HDD DVD Recording drive is set to DVD

BMessage displayed in the “Drive space” line

OK: Displayed if the recording can fit in the remaining space.

>(Date): For recordings made daily or weekly, the display will show until when recordings can be made (up to a maximum of one month from the present time) based on the time remaining on the disc.

!: It may not be possible to record because: ≥there is not enough space left.

≥the number of possible titles has reached its maximum.

≥programmes are overlapped.

≥you stopped a daily or weekly timer recording.

Relief: Timer programmes that will be relief recorded to the HDD.

CChannel name, programme name and other information are displayed.

∫To change a programme

Press [3, 4] to select the programme and press [OK]. (> 23, right column, step 3)

∫To delete a programme

Press [3, 4] to select the programme and press [DELETE ¢].

You can also delete a programme with the following steps

1Press [3, 4] to select the programme and press [OPTION].

2Press [3, 4] to select “Delete” and press [OK].

∫To exit the timer recording list

Press [PROG/CHECK].

Note

≥Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.

Notes on timer recording

≥A disc with different TV system may not be played with the setting as is, only when recording or on standby for the timer recording. In this case, you will be able to playback by changing the “TV System” settings. But to prevent the failure of the timer recording, change back the settings before the recording starts. (> 63)

≥Timer recordings are activated regardless of whether the unit is turned on/off.

≥Timer recordings begin when the set time is reached even when playing.

≥Timer recordings do not begin while editing or copying in normal speed mode (> 45).

≥If the unit is turned on when timer recording begins, it remains turned on after recording finishes. It does not turn off automatically. You can turn the unit off during timer recording.

≥When you programme successive timer recordings to start immediately one after the other, the unit cannot record the part at the beginning of the later programmes.

Programme	Programme	Not recorded
		Not recorded
Recorded	Recorded

Advanced operations

RQT9306