Panasonic DMR-ES10 Flexible Recording, Press F Rec, Recording from a video cassette recorder

e.g., DVD-RAM

Refer to the control reference on page 15.

Flexible Recording

(Recording that fits the remaining disc space)

RAM -R -RW(V) +R

The unit sets the best possible picture quality that fits the recording within the remaining disc space. This is convenient when you want the recorded program to fit one disc perfectly or you are concerned about the amount of free space on the disc. The recording mode becomes FR mode.

Preparation

Select the channel to be recorded or the external input.

While stopped

Press [F Rec].

FLEXIBLE RECORDING
Record in FR mode.
Maximum rec. time	8 Hour 00 Min.	Maximum recording
Set recording time	1 Hour 30 Min.	time
		This is the maximum
Start	Cancel
		recording time in EP
		mode.

Press [w, q] to select “Hour” and “Min.” and press [e, r] to set the recording time.

•You can also set the recording time with the numbered buttons.

When you want to start recording

Press [e, r, w, q] to select “Start” and press [ENTER].

Recording starts.
• All the recording modes from	XP DVD–
	SP	RAM
XP to EP appear in the	LP
display.	EP

To exit the screen without recording

Press [RETURN].

To stop recording partway	DVD-RAM	Remaining
Press [g].	Rec. 0:59
To show the remaining time	CH71	time
	Stereo
Press [STATUS].

Using “Flexible Recording” is convenient in these kinds of situations.

•When the amount of free space on the disc makes selecting an appropriate recording more difficult

•When you want to record a long program with the best picture quality possible

e.g., Recording a 90 minute program to disc

If you select XP mode, the program will not fit one disc.

		If you try to record a 90 minute
		program in XP mode, only the first sixty
4.7GB	4.7GB	minutes will fit on the disc and the 30
DVD-RAM	DVD-RAM	minute balance will not be recorded.

If you select SP mode, the program will fit one disc.

	However there will be 30 minutes remaining
4.7GB	disc space.
DVD-RAM

If you select “FLEXIBLE RECORDING” the program will fit one disc perfectly.

4.7GB

DVD-RAM

Recording from a video cassette recorder

RAM -R -RW(V) +R

Preparation

Connect a video cassette recorder to this unit’s input terminals. Insert a disc you can use for recording.

Note

When recording using this unit’s input terminals, only the sound received at the time of recording will be recorded.

As long as secondary audio that is recorded on the video cassette is not output on the unit in play, it is not recorded.

e.g.: Connecting to the IN2 input terminals		Recording
OPEN/CLOSE	REC
CH
IN2

IN2

Yellow White Red

S Video		Audio/Video cable
cable
	Other video equipment

If the audio output of the other equipment is monaural, connect to L/ MONO.

The S VIDEO terminal achieves a more vivid picture than the VIDEO terminal.

While stopped

Press [INPUT SELECT] to select the input channel for the equipment you have connected.

e.g., If you have connected to IN2 input terminals, select “IN2”.

Press [REC MODE] to select the recording mode.

Start play on the other equipment.

Press [* REC].

Recording starts.

To skip unwanted parts

Press [h] to pause recording. (Press again to restart recording.)

To stop recording

Press [g].

To record program in such a way as to fill up the remaining space on the disc

➔Left, Flexible Recording

Almost all videos and DVD software on sale have been	RQT8009
treated to prevent illegal copying. Any software that has been

so treated cannot be recorded using this unit. 17