Panasonic DMR-ES10 Manually programming scheduled recordings, Check, change or delete a program

You can enter up to 16 programs up to a month in advance. (Each daily or weekly program is counted as one program.)

•When connecting a cable TV box or satellite receiver, select the channel on the cable TV box or satellite receiver before the scheduled recording starts.

Manually programming scheduled recordings

RAM -R -RW(V) +R

1 Press [SCHEDULE].

SCHEDULE				Remaining Recording Time			1:58 SP
LIST						3/26 TUE	12:53 PM
		No	Channel	Date	On	Off Mode Check
	01		39	4 / 1 MON	4:20 PM	5:10 PM	SP OK
				New Scheduled Recording

2 Press [e, r] to select “New Scheduled Recording” and press [ENTER].

3 Press [q] to move through the items and change the items with [e, r].

	SCHEDULED Remaining Recording Time						1:58 SP
	RECORDING				3/26 TUE		12:53 PM
		Channel Date		On		Off Mode
		39	4 / 1 MON	4:20 PM	5:10 PM		SP
						Title Name
• Press and hold [e, r] to alter On (Start time) and Off (Finish
	time) in 30-minute increments.

•You can also set Channel, Date, On (Start time), and Off (Finish time) with the numbered buttons.

•You can also press [REC MODE] to change the recording mode.

•DATE

Date:	Current date up to one month later minus
	one day
Daily timer:	Sun-Sat → Mon-Sat → Mon-Fri

Weekly timer: Weekly Sun → --- → Weekly Sat

•Title Name

Press [w, q] to select “Title Name” and press [ENTER] (➔ page 31).

4 Press [ENTER].

SCHEDULE				Remaining Recording Time			1:58 SP
LIST						3/26 TUE	12:53 PM
		No	Channel	Date	On	Off Mode Check			Check to make
		01	64 ABC	3/ 26 TUE	1:00 PM	2:00 PM	SP	OK
	02		64 ABC	3/ 26 TUE	2:30 PM	3:00 PM	SP	OK	sure “OK” is
				New Scheduled Recording					displayed.

Repeat steps 2–4 to schedule other recordings.

5 Press [SCHEDULE].

The message “Turn recorder off for Scheduled Recording.” is shown on the television.

6 Press [^ DVD POWER].

The unit turns off and “z” lights on the unit’s display to indicate scheduled recording standby has been activated.

RAM

•Even if the unit is in scheduled recording standby, you can play a disc. Without pressing [^ DVD POWER], just press [q] (PLAY) or [DIRECT NAVIGATOR]. Scheduled recording works even during play.

■To release the unit from recording standby

Press [^ DVD POWER].

The unit turns on and “z” goes out.

•Be sure to press [^ DVD POWER] to return the unit to standby

mode before the scheduled recording time. Scheduled recording will work only if “z” is displayed.

■To cancel recording when recording has

already begun

Press [g], then [ENTER] within 5 seconds.

•You can also press and hold [g] on the main unit for more than 3 seconds to stop recording.

Note

•“z” flashes when the unit cannot go to scheduled recording standby (e.g., a recordable disc is not in the disc tray).

•When you program successive scheduled recordings to start immediately one after the other, the unit cannot record the part at the beginning of the later programs (a few seconds when recording with DVD-RAM and approximately 30 seconds when recording with DVD-R, DVD-RW (DVD-Video format) or +R).

•If you set DST (Daylight Saving Time) to On when manually setting the clock (➔ page 34), scheduled recording may not work when summer switches to winter and vice versa.

	Check, change or delete a program
						Recording
RAM			-R	-RW(V)	+R
• Even when the unit is turned off, you can display the schedule list
by pressing [SCHEDULE].
Press [SCHEDULE].
Icons
		This program is currently recording.
		The times overlap those in another program. Recording of
	W
		the program with the later start time starts when the earlier
		program finishes recording.
		You stopped a weekly or daily scheduled recording. The icon
		disappears the next time the scheduled program starts
		recording.
	F The disc was full so the program failed to record.
		The material was copy-protected so it was not recorded.

XThe program did not complete recording because the disc is dirty or for some other reason.

SCHEDULE		Remaining Recording Time			1:58 SP
LIST				3/26 TUE	12:53 PM
	No Channel	Date	On	Off Mode Check
		New Scheduled Programing

Message displayed in the Check line
OK:	Press ENTER to store new schedule.
	Displayed if the recording can fit in the remaining
	space.	Cancel	No. 0 --9

→(Date): For recordings made daily or weekly, the display will show until when recordings can be made (up to a maximum of one month from the present time) based on the time remaining on the disc.

!: It may not be possible to record because:

•the disc is write-protected

•there is no more space left

•the number of possible titles has reached its maximum.

■To change a program

Press [e, r] to select the program and press [ENTER]. (➔ left, step 3)

■To delete a program

Press [e, r] to select the program and press [ CANCEL] or [ADD/DLT].

■To exit the schedule list

Press [SCHEDULE].

The message “Turn recorder off for Scheduled Recording.” is shown on the television.

■To put the unit on scheduled recording standby

Press [^ DVD POWER].

The unit turns off and “z” lights on the unit’s display to indicate scheduled recording standby has been activated.

•Programs that failed to record are displayed gray. They are automatically deleted from the schedule list at 4 a.m. two days later.

• During scheduled recording, you can change the end time as long RQT8009

as the recording mode is not “FR”. 19