Panasonic DMR-ES10 warranty Scheduled recording, Press VCR Plus+, Press Schedule

Scheduled recording

DVD POWER TV

^ DVD POWER POWER

INPUT SELECT TV/VIDEO CH VOLUME

	Numbered
	buttons
					AUDIO
	CANCEL	CANCEL		VCR Plus+	CM SKIP
					VCR Plus+
Recording		SKIP		SLOW/SEARCH
	NAVIGATOR				q
	g
	DIRECT	DIRECT NAVIGATOR			FUNCTIONS
		TOP MENU
					e, r, w, q
					ENTER
		SUB MENU			RETURN
		SCHEDULE	DISPLAY	STATUS	TIME SLIP
	SCHEDULE
	REC MODE	REC	REC MODE	ERASE	ADD/DLT
				CREATE	ADD/DLT
		OPEN/CLOSE	SETUP		F Rec
				CHAPTER

RAM -R -RW(V) +R

You can enter up to 16 programs up to a month in advance.

•When connecting a cable TV box or satellite receiver, the VCR Plus+ system does not work. Program the scheduled recording manually and select the channel on the cable TV box or satellite receiver before the scheduled recording starts.

Preparation

•Turn on the television and select the appropriate video input to suit the connections to this unit.

•Check that the time on the unit is correct.

Using VCR Plus+ system to make scheduled recordings

Entering VCR Plus+ numbers is an easy way of scheduled recording. You can find these codes in TV listings in newspapers and magazines.

1 Press [VCR Plus+].

VCR Plus+	Remaining Recording Time		1:58 SP
		3/26 TUE	12:53 PM

Enter the PlusCode with the numbered buttons.

No. 0 --9

2 Press the numbered buttons to enter the PlusCode number.

•To correct the number

Press [w] to move back to correct a digit.

RQT8009

3 Press [ENTER].

SCHEDULED		Remaining Recording Time			1:58 SP
RECORDING				3/26 TUE	12:53 PM
	Channel Date		On	Off Mode
	39	4 / 1 MON	4:20 PM	5:10 PM	SP

Title Name

•When “XP” is displayed in the unit’s display, the recording mode automatically changes to “FR” in order to prevent loss of recording when there is not enough space. Change to “XP” mode if you want to set the scheduled recording using “XP” mode.

•Confirm the program and make corrections if necessary using [e, r, w, q] (➔ page 19, step 3).

•You can also press [REC MODE] to change the recording mode.

•Title Name

Press [w, q] to select “Title Name” and press [ENTER] (➔page 31).

4 Press [ENTER].

The settings are stored.

SCHEDULE				Remaining Recording Time			1:58 SP
LIST						3/26 TUE	12:53 PM	Check to make
		No	Channel	Date	On	Off Mode Check
	01		39	4 / 1 MON	4:20 PM	5:10 PM	SP OK	sure “OK” is
				New Scheduled Recording				displayed.

Repeat steps 1–4 to program other recordings.

5 Press [SCHEDULE].

The message “Turn recorder off for Scheduled Recording.” is shown on the television.

6 Press [^ DVD POWER].

The unit turns off and “z” lights on the unit’s display to indicate scheduled recording standby has been activated.

RAM

•Even if the unit is in scheduled recording standby, you can play a disc. Without pressing [^ DVD POWER], just press [q] (PLAY) or [DIRECT NAVIGATOR]. Scheduled recording works even during play.

■To release the unit from recording standby

Press [^ DVD POWER].

The unit turns on and “z” goes out.

•Be sure to press [^ DVD POWER] to return the unit to standby mode before the scheduled recording time. Scheduled recording will work only if “z” is displayed.

■To cancel recording when recording has

already begun

Press [g], then [ENTER] within 5 seconds.

•You can also press and hold [g] on the main unit for more than 3 seconds to stop recording.

Note

•“z” flashes when the unit cannot go to scheduled recording standby (e.g., a recordable disc is not in the disc tray).

•The actual time recorded may be longer than the program itself when television programs are recorded using VCR Plus+.

•When you program successive scheduled recordings to start immediately one after the other, the unit cannot record the part at the beginning of the later programs (a few seconds when recording with DVD-RAM and approximately 30 seconds when recording with DVD-R, DVD-RW (DVD-Video format) or +R).

•If you set DST (Daylight Saving Time) to On when manually setting the clock (➔ page 34), scheduled recording may not work when summer switches to winter and vice versa.

18