Restore User Setting, Captioning, Chip Menu Item

Restore User Setting

This setting allows for the selection of allowing user settings for CC to be stored between power cycles, or to always use a default setting on power on. Select YES to override the previous user CC setting on power on, or select NO to allow the previous user setting to be used on the next power on.

Captioning

This setting allows an ON or OFF setting for CC as a default power on status.

Digital Captioning Mode

This setting allows the selection of the CC mode to be used for the Digital Channels

Analog Captioning Mode

This setting allows the selection of the CC mode to be used for the Analog Channels

V-Chip Setup

This submenu sets up default options for the V-Chip settings.

Restore User Setting

This setting allows for the selection of allowing user settings for V-Chip to be stored between power cycles, or to always use a default setting on power on. Select YES to override the previous user V-Chip setting on power on, or select NO to allow the previous user setting to be used on the next power on.

V-Chip Menu Item

This setting controls whether the user has access to the V-Chip selection and settings. Selecting YES will allow the V-Chip menu item to appear on the user menu. Selecting NO will cause the V-Chip settings to no be user accessible and they will not appear on the user menu.

Reset Access Code

This is an open setting to allow for the reset of the code. In set up mode, this code can be overwritten without knowing the previous code. This is useful incase the previous user forgot the code. The code will be reset to the default code of 0000

Sony ICS-SP30 manual Restore User Setting, Digital Captioning Mode, Analog Captioning Mode