Sony SAT-A65, SAT-B65 manual Telephone Jack

Attach the antenna cable You can configure your system several ways, depending on what additional components (such as a VCR, DVD player, or A/V receiver) you select. For now, however, use the simplest configuration to check your antenna and cabling.

•Ensure that the DIRECTV Receiver is not plugged into an electrical outlet.

•Attach the RG-6 coaxial antenna cable to the SATELLITE IN connector on the back of the DIRECTV Receiver. Refer to the appropriate figure below.

1

2

VHF/UHF IN

VHF (SAT)

/UHF OUT

3 4 5 6

7

Model: SAT-B65

Digital Satellite Receiver

TEL LINESony Electronics, Inc.

Made in Mexico

8 9

Table 1: Rear panel connections - SAT-B65 DIRECTV Receiver

1	SATELLITE IN connector	6	VIDEO OUTPUT jack
2	VHF/UHF IN connector	7	S-VIDEO jack
3	VHF (SAT)/UHF OUT connector	8	TELEPHONE JACK
4	AUDIO OUTPUT (R) jack	9	AC POWER CORD

5AUDIO OUTPUT (L) jack

6 8 10 12 14

VHF/UHF IN

1

2

		VHF (SAT)						Model: SAT-A65
							TEL LINE	Digital Satellite Receiver
		/UHF OUT						Made in Mexico
								Sony Electronics, Inc.
3	4	5	7	9	11	13	15	16
		Table 2: Rear panel connections - SAT-A65 DIRECTV Receiver
1	SATELLITE IN connector							9	AUDIO OUTPUT (L) jack
2	RF REMOTE antenna jack							10	AUDIO OUTPUT (L) jack
3	DATA PORT							11	VIDEO OUTPUT jack
4	DIGITAL AUDIO OUTPUT optical jack							12	VIDEO OUTPUT jack
5	VHF (SAT)/UHF OUT connector							13	S-VIDEO jack
6	VHF/UHF IN connector							14	VCR CONTROL cable jack
7	AUDIO OUTPUT (R) jack							15	TELEPHONE JACK
8	AUDIO OUTPUT (R) jack							16	AC POWER CORD

2 Getting started