8.Remove the temporary mounting tape. Attach the emitter permanently with
VCR SETUP |
|
| Thu, Aug 2 2:22 PM | |
Install |
|
|
| |
Signal |
|
|
| |
VCR | Brand | Code | Test | |
Prefs | Admiral | 1 | Record | |
Test | Aiwal | 2 | Stop | |
New Card | ||||
Akai | 3 | Clear | ||
Upgrade | ||||
Audio Dynamics | 4 |
| ||
Features |
| |||
Exit | Bell & Howell | 5 |
| |
Return | Brooksonic |
|
| |
|
|
|
Canon
Select a code
Test the VCR (Record/Stop)
9.Scroll through the VCR brands using the navgation buttons. If you cannot find the correct code listed for your brand of VCR, try related brands that use the same code. Your VCR may also respond to multiple codes.
10.Use the remote control SELECT button to try each code.
11.Alternate between this procedure and testing the code.
This Record/Stop test verifies the specified brand and code controls your VCR. Before starting the test:
•Turn the VCR power on.
•Verify the VCR Control Cable is properly connected.
•Insert a recordable videotape into the VCR.
Signals coming from the remote control at the same time as signals coming from the VCR Control cable may provide unreliable test results.
Connecting a home entertainment system
The A/V receiver must be turned on in order to send the video signal to your TV.
Use the DIRECTV Receiver front panel controls, rather than the remote control, to test the codes.
Test the VCR record and stop commands, If either command does not function, try other codes shown for your VCR brand. If you are unsuccessful after trying all available codes, recheck your VCR Control Cable connections and IR emitter placement.
You can integrate the DIRECTV Receiver into your entertainment system to take advantage of enhanced audio and video capability. Follow these instructions to connect your DIRECTV Receiver.
•To connect the DIRECTV Receiver to your audio system, use A/V cables to connect the satellite receiver to the audio receiver’s AUDIO IN jacks.
•Dolby Digital - With the
Adding system components | 9 |