Preferences | Sony SAT-B65, SAT-A65 guide

Use the PREFERENCES menu pane (shown in the figure below) to change the appearance of the on-screen menus and select how your DIRECTV Receiver operates with other devices. The PREFERENCES pane also allows you to:

•Change the receiver ID

•Set the receiver output channel to channel 3 or 4

•Enable or disable the INPUT button on your remote control.

•Lock the system on a particular channel.

•Select English or Spanish language menus.

•Enable or disable Caller ID on and off.

PREFERENCES		Fri, Aug 3	5:15 PM
Antenna
Signal	Receiver ID	Unit 1
Prefs
	Output Channel	3
Test
	Input Key	On
New Card
	Channel Set	Off
Upgrade
	Menu Language	English
Features
	Color Scheme	Ocean
Exit
	Translucency
Return		Solid
	Caller ID	On
	Factory Defaults

System Preferences menu pane

Change Receiver ID If you are using a second satellite receiver in the same room, or you are using the RF remote control, you may want to change the receiver ID to avoid interference or “cross talk.” The remote control receiver ID can be either “50” or “51.” When using the RF antenna with the SAT-A65 receiver, the ID can be a number from “00” to “15.”

If you change the receiver ID, set your remote control to the desired ID number first. Use this procedure to set the remote control to use a different receiver ID:

1.Press the CODE SET button on the remote control.

2.Enter the desired receiver ID number, either “50” or “51” or a number from “00” to “15” when using the the RF antenna with the SAT-A65 receiver and the RM-Y807 remote control.

3.Test the remote control to ensure that it will control the DIRECTV receiver.

Set output channel Use the Output Channel menu button to toggle between channels 3 and 4, whichever is unused in your area.

Input key enable/disable The Input Key menu button allows you to turn the remote control TV/SAT button on and off.

Lock a channel Use the Channel Set menu button to set the DIRECTV Receiver to permanently stay on a specific channel. When you enter a channel number (5-0-0, for example) then select OK, the receiver will always power up on that channel (channel 500 in this example). The receiver will ignore any attempts to change the channel. Set this option to “Off” to permit normal channel selection.

Using the menus 25