Timer Setting, View Clock, Clock Setting | Philips FW-M55 specification

CLOCK

English	MINI HIFI SYSTEM	PROGRAM SHUFFLE			STEREO
		REPEAT TIMER REC				BACK
		NEWS T.A. AM MW FMLW				FRONT HSD
		60Hz	250Hz 500Hz1KHz	2KHz 4KHz 8KHz
	STANDBY
	ON							RDS
	CLOCK/	MP3•CD		TAPE 1 • 2	CDR/VIDEO			NEWS/TA
	TIMER	CD1 • 2 • 3	BAND	TAPE 1 • 2	CDR/VIDEO
		CD	TUNER	TAPE		AUX
		PROG	STOP•CLEAR	PLAY PAUSE	▲	PRESET	▲	A. REV
		SEARCH • TUNING	STOP•CLEAR	PLAY PAUSE	PREV SIDE NEXT
	D
	UB
	(H
	SD)
	REC	- ALBUM +	MP3-CD		-	TITLE	+	VOLUME
	REC	- ALBUM +	SOUND NAVIGATION		-	TITLE	+	VOLUME
		INCREDIBLE		DYNAMIC BASS
		SURROUND		BOOST

DIGITAL

SOUND CONTROL

5Press CLOCK/TIMER again to store the setting.

™ The clock starts.

•To exit without storing the setting, press Ç on the system.

Notes:

–During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.

–When a power interruption occurs, the clock setting is erased.

–To set the time with RDS clock, see "Receiving RDS Radio Station" under TUNER section.

TIMER

Timer Setting

•The system can switch on to CD, TUNER, or TAPE 2 mode automatically at a preset time. It can serve as an alarm to wake you up.

•Before setting the timer, make sure the clock is set correctly.

•The timer will always be switched on once it is set.

•The volume of the timer will increase from the minimum level until the volume level before the set is switched to standby mode.

1 Press and hold CLOCK/TIMER for more

View Clock

You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (CD, TUNER, etc.). The clock will be displayed for about 7 seconds.

•Press CLOCK/TIMER briefly.

™"PM 10:38 or 22:38" (the current time) will be displayed depending on whether you have selected 12- or 24-hour mode.

™"--:--" will be displayed if the clock is not set.

Clock Setting

The clock can be set in either 12- or 24- hour mode, e.g. "AM 12:00" or "00:00". Before setting the clock, you must be in the View Clock mode.

1Press CLOCK/TIMER to select clock mode.

2Press PROG (on the system only) to select 12- and 24- hour mode.

™If 12-hour mode is selected,

"AM 12:00" starts flashing.

™If 24-hour mode is selected, "00:00" starts flashing.

3Set the hour with àor á on the system.

4Set the minute with íor ë on the system.

than 2 seconds to select timer mode.

™ “ AM 12:00” or “00:00" or the

last timer setting starts flashing

depending on whether you have

selected 12- or 24-hour mode.

™ The TIMER starts flashing.

™ The selected source is lit while other

available sources are flashing.

2 Press CD, TUNER or TAPE to select the

desired source.

•Before selecting CD or TAPE, make sure

a disc or tape is loaded in the disc tray or tape deck 2.

3Press àor á on the system to set the hour for the timer to start.

4Press íor ë on the system to set the minute for the timer to start.

FWM55-22-GB-ENG-V01

12/8/00, 1:57 PM

3139 115 20071