TIMER
5Press CLOCK/TIMER to store the start time.
™The timer is now set.
™The TIMER remains on the display.
• At the preset time, the timer will be activated.
™The selected source will be played.
Notes:
–During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.
–If the source selected is TUNER, the last tuned frequency will be switched on.
–If the source selected is CD, playback will begin with the first track of the selected disc or program. If the CD trays are empty, TUNER will be selected instead.
–If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead.
–The timer will not activate if a recording is in progress.
To switch off the TIMER
1Press and hold CLOCK/TIMER for more than 2 seconds.
2Press Çon the system to cancel the timer.
™The timer is now switched off.
™The display will show "OFF" and the TIMER disappears.
To start the TIMER again (for the same preset time and source)
1Press and hold CLOCK/TIMER for more than 2 seconds.
2Press CLOCK/TIMER again to store the start time.
™The timer is now on.
™The TIMER appears on the display.
SLEEP TIMER
Sleep Timer (only on remote control) | English |
This feature allows you to select a length | |
of time after which the system will switch |
|
to the standby mode automatically. |
|
1Press SLEEP on the remote control repeatedly to select a period of time.
™The selections are as follows (time in minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™ 60 …
™"SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes.
2When you reach the desired length of time, stop pressing the SLEEP button.
™After this amount of time passes, the system will switch to the standby mode.
To switch off the Sleep Timer
•Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.
23
23 | 12/8/00, 1:57 PM | 3139 115 20071 |