Sony FWD-50PX2A manual Installing batteries, M//,/ENTER buttons

Page 12

Location and Function of Parts and Controls

7PICTURE button

Selects Picture mode. Each press toggles between Vivid, Standard, and User 1 to 3.

8ASPECT button

Press to change the aspect ratio.

9M/m/</,/ENTER buttons

The M/m/</, buttons move the menu cursor (yellow) and set values, etc. Pressing the ENTER button sets the selected menu or setting items.

q; Number buttons

Press to enter index numbers.

qa Brightness button

Adjusts the brightness when Picture Mode is set to any of “User1” to “User3.” Press this button, then adjust the brightness with M/m or </, buttons 9.

qs ID MODE (ON/SET/OFF) buttons

Press ON to show an index number on the screen. Enter the index number of the display you want to operate with Number buttons 0, then press SET. Press OFF to return to the normal mode.

For details on the index numbers, see “Operating a Specific Display With the Remote Commander” on page 44 (GB).

qd Volume +/– button

Press to adjust the volume.

qf OPTION2 button

When an optional adaptor board is installed, selects a signal to be input from the device connected to the optional adaptor. Depending on which optional adaptor is installed, each press of the button switches the input between RGB and COMPONENT or between VIDEO and S-VIDEO. However, when the “Fix” input setting has been selected, the input is fixed to one setting.

For details, see “Input Setting” on page 19 (GB).

qg OPTION1 button

When an optional adaptor is installed, selects a signal to be input from the device connected to the optional adaptor. Depending on which optional adaptor is installed, each press of the button switches the input between RGB and COMPONENT or between VIDEO and S-VIDEO. However, when the “Fix” input setting has been selected, the input is fixed to one setting.

For details, see “Input Setting” on page 19 (GB).

qh MENU button

Press to show menus. Press again to hide them.

qj button

Selects the PICTURE AND PICTURE (PAP) mode. Each press toggles between PAP off, P&P, and PinP.

qk Chroma button

Adjusts the chroma when the picture mode is set to any of “User1” to “User3.” Press this button and adjust the chroma with the M/m or </, buttons 9.

ql Contrast +/– button

Adjusts the contrast when Picture Mode is set to any of “User1” to “User3.”

Installing batteries

Insert two size AAA (R03) batteries in correct polarity.

Be sure to

install the

negative <–

end first.

•In normal operation, batteries will last up to half a year. If the Remote Commander does not operate properly, the batteries might be exhausted sooner. Replace them with new ones.

•To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the Remote Commander for a fairly long time.

When the Remote Commander does not work Check that the POWER/STANDBY indicator lights up and the Control Mode in the Remote menu is not set to “Display Unit Only.” The Remote Commander operates the display only when both of the two conditions below are met.

•The display is turned on, or it is in the standby mode.

•The Control Mode in the Remote menu is set to

“Display + Remote” or “Remote Only.”

For details on the Control Mode, see “Control Mode” on page 19 (GB).

For Customers in Taiwan only

12 (GB)

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Flat Panel Display FWD-50PX2/50PX2AFor customers in the U.S.A For customers in CanadaTable of Contents Setting up the Multi Display Adjusting the Sound QualityAdjusting Color Matrix Controlling Power On/Off Automatically Timer FunctionPrecautions SVT Location and Function of Parts and Controls Front / Rear / Left sideIndicator Section Control Button Section TopConnector Panel Optional adaptors Not supplied Video/S-Video Input/Output Adaptor BKM- FW10COMPONENT/RGB Input Adaptor BKM-FW11 Remote Commander RM-980 RGB/COMPONENT Active Through Adaptor BKM-FW12Installing batteries M//,/ENTER buttonsWhen mounting the display horizontally Connecting the Speakers Connecting the AC Power CordPrecautions to avoid/reduce burn-in and picture retention ConnectionsUsing the cable holders To remove the AC power cordCable management Using On-screen Menus Operating Through MenusMenu Guide PICTURE/SOUND Control menuScreen Control menu Picture and Picture PAP menuCustom Setup menu Initial SETUP/INFORMATION menu Input SettingRemote LanguageAuto Screen Adjust IP Address SetupSpeed Setup All ResetTIMER/CLOCK menu Screen Saver menuSwitching the Input Signal Watching the PictureInput Signal, Picture Mode and Display Status Information To display the informationComputer signals Actual on-screen display of the unit’s statusAdjusting the Picture Selecting Image QualityContrast BrightnessPhase SharpnessNoise Reduct Dynamic PictureTo cancel the reset function Gamma CorrectSetting Auto Wide Identification Control SignalPicture Enlargement Original Picture Enlarged Picture Picture TypeSetting the Aspect Adjusting the Size, Position, or the Pixels of the Picture Dot PhaseAdjusting automatically Adjusting manuallyTotal H Pixel SizeShift When P&P is selected When PinP is selectedViewing two pictures at the same time Adjusting the position of the inset picture For PinP only Zooming in on a pictureSetting up the Multi Display Adjusting the Sound Quality Adjusting the Treble, Bass, and Balance, etcAdjusting Color Matrix Selecting the On-screen LanguageControlling Power On/Off Automatically Timer Function Adjusting the time and the dayDisplaying the time On/Off Timer Function Screen Saver Function Reversing the Color Tones of the ImageWhen both Pic Inversion and Pic. Orbit are set to on Changing the Image Position AutomaticallyAdjusting the brightness of background of picture To cancel All WhiteTo cancel Auto Dimmer Turning the screen all whiteSetting an IP address and communication speed Setting an IP address manually ManualSetting a communication speed Speed Setup Self-diagnosis FunctionOperating a Specific Display With the Remote Commander To change the index numberTroubleshooting Problem Cause RemedyDisplay, and that the ventilation Input is set to Fix Specifications Video processingInputs and Outputs VIDEO/S Video input/output adaptor BKM-FW10RGB/COMPONENT connector D-sub 15-pin Pin assignmentソニー株式会社 141-0001東京都品川区北品川6-7-35

FWD-50PX2A, FWD-50PX2 specifications

The Sony FWD-50PX2 and FWD-50PX2A are exceptional professional display models designed for various commercial applications, including retail environments, public information kiosks, and corporate settings. These displays are renowned for their vibrant image quality, advanced technologies, and robust build, making them suitable for a range of digital signage needs.

One of the standout features of the FWD-50PX2 series is the high-resolution plasma panel. With a resolution of 1366 x 768 pixels, the display provides crisp images and stunning detail. The plasma technology also ensures deep blacks and vibrant color reproduction, resulting in impressive visuals that capture attention and encourage engagement.

The FWD-50PX2 and its counterpart, the FWD-50PX2A, also incorporate Sony’s unique Bravia Engine technology. This advanced image processing engine enhances picture quality by optimizing contrast, color, and sharpness in real-time. This means that whether you’re displaying static images, videos, or dynamic content, viewers will enjoy a superior visual experience.

An essential characteristic of these displays is their exceptional readability under various lighting conditions. The anti-glare treatment ensures that images remain clear and visible even in bright environments. This makes the FWD-50PX2 series particularly effective for use in retail spaces, where ambient lighting can sometimes hinder visibility.

In terms of connectivity, the FWD-50PX2 and FWD-50PX2A offer a range of options, including HDMI, VGA, and DVI inputs, making integration with different media sources seamless. This versatility allows users to connect various devices such as computers, video players, and digital signage players without hassle.

Both models also support multiple orientation setups, enabling landscape and portrait arrangements. This flexibility allows businesses to tailor their display configurations to suit specific environments or content requirements.

Durability is another critical aspect of the FWD-50PX2 series. Designed for continuous operation, these displays can withstand the demands of busy commercial environments. Their build quality ensures longevity, reducing the need for frequent replacements.

In summary, the Sony FWD-50PX2 and FWD-50PX2A displays are powerful tools for businesses looking to enhance their visual communications. With high-resolution clarity, advanced image processing, robust connectivity options, and flexible installation capabilities, they meet the diverse needs of today's digital signage applications.
Top Page Image Contents